Been busy with work and general family stuff so only recently been able to spend any real time in the garage
Started by replacing the passenger cab step
Then to the rear corner. Took out the tray, corner and arch which had started to swell around the spot welds
So before replacing those, I decided to have a poke at what I secretly knew was there but was never brave enough to go looking
Will also need out riggers, top hats, I beams, cross members, inner and outer sills, blah blah blah.
I can't afford to get all the panels in one go so any suggestions of which to tackle first
Front and work back, or do one side at a time?
Is it easier to cut the I beams and only replace the outer 6 inches or replace the whole thing?