feb '60 ex PMG S/C "Jimmy"

wohoo · Post by **wohoo** » Mon Mar 14, 2011 8:49 pm

oh be carefull those prefect rime will vibrate and sorta come orf! the pcd is very close but fitment is dodgy..

4tune8 · Post by **4tune8** » Tue Mar 15, 2011 2:47 pm

cheers for the heads up andy, not going with the prefects anyhoo

some pics of the floor going in..

4tune8 · Post by **4tune8** » Tue Mar 15, 2011 2:50 pm

others bits n bobs

4tune8 · Post by **4tune8** » Tue Mar 15, 2011 2:53 pm

rest of dogleg is ok, just a little patchwork needed

bay window bandit · Post by **bay window bandit** » Tue Mar 15, 2011 5:42 pm

The S.C is coming along nicely, keep the photos coming, we all need a bit of inspiration sometimes.

4tune8 · Post by **4tune8** » Tue Apr 05, 2011 12:50 pm

bit of colour on the tailgate, needs to be rubbed thru to the primer and scotchbrited to try and match the rest once they are polished and ankor waxed

new hinge carrier for treasure chest and door back on for a trial fit, bit of tweaking yet

thin skim of fill and a bit of sanding to be done yet

splitwannabe · Post by **splitwannabe** » Tue Apr 05, 2011 4:53 pm

ka---razzzy

very tidy. love the picture of the 3 kombis together

63single · Post by **63single** » Sun Apr 10, 2011 11:58 am

love this build keep em comming just want to ask a question im a average welder and thinking of welding the bed floor and cab divider my self have you done this yet if so how hard is it and if you have any pics

4tune8 · Post by **4tune8** » Mon Apr 11, 2011 12:06 pm

63single wrote:love this build keep em comming just want to ask a question im a average welder and thinking of welding the bed floor and cab divider my self have you done this yet if so how hard is it and if you have any pics

Cheers mate, there's some pics of the floor being welded from underneath, Sam used tech screws to pull the floor down to the I beams, welded then removed the screw and welded where the hole was. We used a floor section that was meant for the D/C so a bit of mod was needed cos pillars are in different places but overall dimensions are the same, a far bit of trial fitting and removing was needed, had to be welded from underneath cos a bit of a pain to work in the enclosed treasure chest area, would be much simpler if the top bed was off too

some more pics of Sam's handywork on the hinge carrier

63single · Post by **63single** » Fri Apr 15, 2011 11:32 pm

hey i think i explain wrong the floor in the treasure chest is done on mine i think i ment the top floor would you do the same drill holes and but weld or would you tack weld on the rails like you did with the bottom
cheers
ramzi