the 60 split update 25/7/06
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia
the 60 split update 25/7/06
just redoing it as the last one now comes as a guest
hi ya got the bus last week
it is my 60 11 window split
have cut out short seal and replaced and also chuched on the white walls as it had big fat sunraisers(ugly star things)
have also put in a 1600 sp as the 1300 was a shiter
just going to cut some rust out and get it looking neat
putting u.s spec head lights in and removing the trailer indercators
fixing the roof as it has a small rust hole as it was fillwith foam and has held water in it nicely
outriggers and both crossmembers ,heater channel and a inner and outer nose section and that will make it a heap more solid
have got a tvpe 3 1500 gearbox for the lowering process and am sourcing some drop spindals for the front
will keep you all posted
Paul
hi ya got the bus last week
it is my 60 11 window split
have cut out short seal and replaced and also chuched on the white walls as it had big fat sunraisers(ugly star things)
have also put in a 1600 sp as the 1300 was a shiter
just going to cut some rust out and get it looking neat
putting u.s spec head lights in and removing the trailer indercators
fixing the roof as it has a small rust hole as it was fillwith foam and has held water in it nicely
outriggers and both crossmembers ,heater channel and a inner and outer nose section and that will make it a heap more solid
have got a tvpe 3 1500 gearbox for the lowering process and am sourcing some drop spindals for the front
will keep you all posted
Paul
- Attachments
-
- IMG_1004.JPG (26.9 KiB) Viewed 2850 times
-
- IMG_1003.JPG (33.04 KiB) Viewed 2892 times
-
- IMG_1005.JPG (38.29 KiB) Viewed 2893 times
Last edited by splitdawhiska on Tue Jul 25, 2006 5:45 pm, edited 4 times in total.
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia
just got it regoed and am now driving everywhere
have replaced all the brakes (everything)
and got the gearbox fixed as you had to sit on the passenger seat to get reverse hehe
panited the front bumper(roughly)
and got the electrics sorted
all i need now is to fit the goodies i got from roy yesterday and it all good
Cheers Paul
have replaced all the brakes (everything)
and got the gearbox fixed as you had to sit on the passenger seat to get reverse hehe
panited the front bumper(roughly)
and got the electrics sorted
all i need now is to fit the goodies i got from roy yesterday and it all good
Cheers Paul
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia
- Stealth
- DSKer
- Posts: 527
- Joined: Mon May 16, 2005 10:35 am
- Location: Mordialloc, Australia
-
- DSKer
- Posts: 4516
- Joined: Mon May 16, 2005 12:56 am
- Contact:
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia
- wohoo
- DSKer
- Posts: 2557
- Joined: Mon May 16, 2005 8:56 am
- Location: Tasmania
- Contact:
Far out, came up a treat ay!
well done dude
Andy
well done dude
Andy
They laugh because You are different, You laugh because They are all the same.
........................
Need Towing in Tassie, See www.tigertowing.com.au or call 0400 16 14 12
........................
Need Towing in Tassie, See www.tigertowing.com.au or call 0400 16 14 12
- byronbus
- Admin
- Posts: 7840
- Joined: Mon May 16, 2005 10:45 pm
- Location: Byron Bay
- Tonz Magonz
- Mod
- Posts: 4085
- Joined: Tue May 17, 2005 9:13 pm
- Location: Melbourne mostly
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia
-
- DSKer
- Posts: 4516
- Joined: Mon May 16, 2005 12:56 am
- Contact:
i am having the same problems with my ute at the moment, soak in penetrating oil/lanolin etc and try with an impact screwdriver.. mine still doesn't want to move so i figured the hinges are goodi might just trie and repair the doors myself.. glad it's ratty ratty. good luck mate!
Any other ideas anyone.. i spose the next step may be buying new screws and drilling out the crusty ones carefully.
Timmy
Any other ideas anyone.. i spose the next step may be buying new screws and drilling out the crusty ones carefully.
Timmy
-
- DSKer
- Posts: 909
- Joined: Thu May 19, 2005 1:32 pm
- Location: hahndorf
door screws
try a bit of heat, either oxy with a no6/ no8 tip and heat the centre of the screw or use a LPG hand blowtorch with a barbecue gas bottle, much cheaper and u dont pay bottle rental, handpiece is about $80. heat will get most things undone, otherwise, 9.5mm drillbit, drill head off screw and then tap lockplate( pain in the rear).
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia