Page 1 of 3

Marz's 65 11 window

Posted: Thu Apr 17, 2014 9:06 am
by marz
Hey All,
Thought I better contribute some of the stuff I've been up to over the last few months. I've had this 65 in storage for the last 10 years and I'm jack of driving a bay everyday so the time has come to get this thing on the road. Got most of the rust done, all the usual spots, tried to make as many panels myself because it's a tight budget build. Paint will stay the same, and make a nice interior. It will be a daily driver so it wont be stupid low and will have decent running gear. Already has BJ beam in so will stick with that. Plan is just adjusters and straight axle for road worthy then bay boosted disks up front and bolt on IRS with 1776cc motor. Got all the parts so now I just gotta find time to do it all!. Here's some pics. CHeers Marz.
Image
Image
Image
Image

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 9:11 am
by MID WEST DUBBER
Nice work 8)

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 9:14 am
by kombi niko
Sweet bus, shouldn't take too long :) Id be leaving the adjusters off till after roadworthy ;) will be good to see another one on the road.

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 9:21 am
by marz
more pics
Image
Image
which ways up?
Image
Image
Image

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 9:39 am
by marz
Just a couple more pics then I'm done, Niko my mechanic knows they came with adjusters from the factory!.
Image
Image
Made a die to do the nose
Image
Image
Image
Ok enough big pics for now...

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 1:47 pm
by kombi niko
marz wrote:Just a couple more pics then I'm done, Niko my mechanic knows they came with adjusters from the factory!.
Image
Image
Made a die to do the nose
Image
Image
Image
Ok enough big pics for now...
Classic , I'm using that one too ;) as well as the irs ;)

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 2:26 pm
by Rossco WA
Awesome work there, looks a top bus got everything on it....keep it up will folow this build 8)

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 3:35 pm
by marz
Thanks, I know it aint 'factory' with out the lip on the front but i gotta work with what I've got. Some hack has made it a walk thru so that will get rectified at some stage. Has anyone one used the cheaper jackpoints available and will I be shitty if i buy them ?, fair bit of work to fix the old ones.
Marz.

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 3:45 pm
by Cartonofbeerkombi
Nice bus, I brought the cheaper jacking points, tried jacking it up the other day with the factory jack and they just start bending. :(

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 3:45 pm
by kombi niko
omg, what ever you do don't get the cheap ones, i got one and its so badly made I threw it out. Was like it was made out of tin.

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 3:51 pm
by splitbus
Nice work, is this bus from Sydney

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 5:05 pm
by marz
Thats the reassurance I needed, only one jack point left on the car so it might get taken off, I hate bus jacks anyways.
Split bus, I bought the bus out of the Geelong Addy when I was 17 for $1700 and has vic rego from the 90's so as far as I know it always been down here.

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 6:18 pm
by FrankenCab
Buy autocraft or ww jacking points well worth the extra$

Re: Marz's 65 11 window

Posted: Thu Apr 17, 2014 6:23 pm
by 067DUB
I just got Autocraft, yeah they're bloody thick!

Re: Marz's 65 11 window

Posted: Fri Apr 18, 2014 9:37 am
by kombi niko
x2 on the autocraft