'56 SCab
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- SplitPersonality
- DSKer
- Posts: 657
- Joined: Sun Apr 15, 2007 11:04 am
- Location: Left at the round-a-bout and up the hill
'56 SCab
G'day here is progress on the SCab thus far..
Replaced;
Inner and outer sills, Front outriggers and parts of tophats front and RH rear, Treasure chest floor patches, Tank supports.
Repaired; Damage on long side and damage on roof.
As is always the case, the more that is removed, the more crusty suprises are found..although too bad.
Here is a few pics....
Replaced;
Inner and outer sills, Front outriggers and parts of tophats front and RH rear, Treasure chest floor patches, Tank supports.
Repaired; Damage on long side and damage on roof.
As is always the case, the more that is removed, the more crusty suprises are found..although too bad.
Here is a few pics....
- Attachments
-
- Tank support 1.JPG (60.66 KiB) Viewed 835 times
-
- Now with identity2.JPG (60.3 KiB) Viewed 835 times
-
- Bed floor 3.JPG (55.17 KiB) Viewed 2763 times
-
- RHS Straight 4.JPG (51.79 KiB) Viewed 835 times
-
- Top vent out 5.JPG (61.32 KiB) Viewed 835 times
-
- RHS Before 6.JPG (54.73 KiB) Viewed 835 times
-
- Roof after 8.JPG (48.33 KiB) Viewed 835 times
-
- Roof before 10.JPG (40.56 KiB) Viewed 835 times
-
- LHS Sill 11.JPG (44.31 KiB) Viewed 2763 times
-
- Potting mix 12.JPG (66.5 KiB) Viewed 835 times
- Shaven
- DSKer
- Posts: 7420
- Joined: Tue Sep 19, 2006 4:17 pm
- tinman
- DSKer
- Posts: 231
- Joined: Tue Aug 16, 2005 10:44 pm
- Location: Lalor Park, Sydney NSW
- SplitPersonality
- DSKer
- Posts: 657
- Joined: Sun Apr 15, 2007 11:04 am
- Location: Left at the round-a-bout and up the hill
Hey thanks fullas
Matty, all panels are made with zinc coated sheet, great for repelling the rust that bit better..
And yes I plan to retain the weathered, super ratty look for now, maybe just blending new rust repairs into the dove blue.(Or whats left of it!
0
Tinman, Plans for now are Sbug engine and gearbox, IRS, Very Narrow beam, Safaris, Whitewalls and almost scratching his belly on the road!![Cool 8)](./images/smilies/icon_cool.gif)
Matty, all panels are made with zinc coated sheet, great for repelling the rust that bit better..
And yes I plan to retain the weathered, super ratty look for now, maybe just blending new rust repairs into the dove blue.(Or whats left of it!
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
Tinman, Plans for now are Sbug engine and gearbox, IRS, Very Narrow beam, Safaris, Whitewalls and almost scratching his belly on the road!
![Cool 8)](./images/smilies/icon_cool.gif)
- Shaven
- DSKer
- Posts: 7420
- Joined: Tue Sep 19, 2006 4:17 pm
- no show
- DSKer
- Posts: 1102
- Joined: Tue May 17, 2005 8:31 pm
- SplitPersonality
- DSKer
- Posts: 657
- Joined: Sun Apr 15, 2007 11:04 am
- Location: Left at the round-a-bout and up the hill
- tinman
- DSKer
- Posts: 231
- Joined: Tue Aug 16, 2005 10:44 pm
- Location: Lalor Park, Sydney NSW
- kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
- splitbus
- DSKer
- Posts: 3232
- Joined: Sun Dec 09, 2007 7:47 am
- Location: Brisbane Northside
- Leroy
- DSKer
- Posts: 2544
- Joined: Thu Jul 05, 2007 11:58 pm
- Location: Brisbane (bayside)
-
- DSKer
- Posts: 121
- Joined: Fri Oct 27, 2006 9:17 pm
- Location: alpine region
- splitbus07
- DSKer
- Posts: 615
- Joined: Thu Nov 08, 2007 11:43 am
- Location: North Balgowlah, Sydney