Page 1 of 2
The 62 singlecab
Posted: Tue Jan 03, 2006 3:55 pm
by byronbus
I have an original paint, unmolested running and registered 62 singlcab.
Its registered, has very little rust, awesome gates and tray and is 100% complete.
Has brand new tyres...
Posted: Tue Jan 03, 2006 4:00 pm
by byronbus
Original NSW rego from day dot, never been unregistered, originally came from Canberra, then for 18 years it lived in Penrith, then up here for a few years, always garaged, when in Penrith it was used more as a glueing table for a furniture maker than driven...
Has no lip on the rear guards and has a bench front seat, is very unique and original...
Has a 1600tp, new heads barrells and pistons, will have the tuning issue sorted for the sale...
Posted: Tue Jan 03, 2006 4:01 pm
by byronbus
I will take some new pics in the next few days...the front nose is amazing...
Posted: Tue Jan 03, 2006 4:02 pm
by byronbus
...
Posted: Fri Jan 06, 2006 9:56 pm
by byronbus
some new pics
Posted: Fri Jan 06, 2006 10:00 pm
by byronbus
The dropsides are pretty amazing, very little rust and very straight...
Posted: Fri Jan 06, 2006 10:05 pm
by byronbus
How good is the tray, its amazing, no rust and very straight...
Some interior shots, ratty bench seat...recover or drive as is, passed NSW pinkslip with a towel on it...
Posted: Fri Jan 06, 2006 10:09 pm
by byronbus
Very little rust in this bus, the nose and underside are amazing
Posted: Fri Jan 06, 2006 10:11 pm
by byronbus
The doors are all good...
Posted: Fri Jan 06, 2006 10:15 pm
by byronbus
1600tp, new barrells and pistons...
Posted: Fri Jan 06, 2006 10:23 pm
by byronbus
The worst areas of this bus, which is very little and passed a pink slip in November, the rust is treated and could be repaired over the coming years...
The cab floor is perfect except for a pin hole (1 pin hole) and a 1cent peice or less bublle under the rubber on the passanger side...also a small hole in drivers dogleg (easy repair).
The worst is the bottom of the bulkwall at the front of the tray, but very easily fixed by welding a small strip along the join where the panels meet...
The sills have had some treatment but are not rusty...wont need attention, just keep the lanolin flowing and penetrol...
Posted: Fri Jan 06, 2006 10:30 pm
by byronbus
Dont be turned off by the rust, the pics dont do it any justice...The rust is very very minimal, just trying to show the worst with the good...
Posted: Fri Jan 06, 2006 10:36 pm
by byronbus
The passanger rear corner has a very slight dent...but again easily repaired...How good would this ute look, narrowed front beam and slammed in all its ratty glory...But also would be a perfect base for a tidy and respray... original paint and no repairs and you can see exactly what your getting
Posted: Mon Jan 09, 2006 8:12 pm
by Volksmuller
bruce i'll make you an offer ...how a bout a kickarse 2.3 86x92 with 48's and 1 5/8 merged exhaust and you give me the ute ?
Posted: Wed Jan 11, 2006 7:48 pm
by daveo
That dirty stinking old SANTA CLAUS has left too many people broke this year.
Fat barstard.
