56
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
- DSKer
- Posts: 1218
- Joined: Tue Apr 03, 2007 5:00 pm
- Location: Sunshine Coast
- kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
-
- DSKer
- Posts: 1218
- Joined: Tue Apr 03, 2007 5:00 pm
- Location: Sunshine Coast
-
- DSKer
- Posts: 1218
- Joined: Tue Apr 03, 2007 5:00 pm
- Location: Sunshine Coast
- Ian 68
- DSKer
- Posts: 1373
- Joined: Sat May 02, 2009 9:58 pm
- Location: Caloundra, QLD
- Leroy
- DSKer
- Posts: 2544
- Joined: Thu Jul 05, 2007 11:58 pm
- Location: Brisbane (bayside)
- vonsplit
- DSKer
- Posts: 100
- Joined: Fri Jun 12, 2009 6:13 pm
- Location: Hervey bay
- nick62
- DSKer
- Posts: 239
- Joined: Sun Jan 20, 2008 9:48 pm
I had the throwout bearing fork snap AND the hockey stick snap in the space of two minutes once, stuck in 1st gear and no clutch. Had to nurse it home by turning the bus off at red lights....then start her up to go....in 1st gear. Took an hour to get homezeuspig wrote:Well, I didn't make it.
I was two streets away from home and went to change gears and nothing much happened...got underneath and the selecter rod has snapped!!!
,
more betters for goods nicer
-
- DSKer
- Posts: 1218
- Joined: Tue Apr 03, 2007 5:00 pm
- Location: Sunshine Coast
I am happy with the plates, they weren't cheap!!
I was up at hervey bay on the weekend, was a great weekend.
Still sorting out a few probs with the bus, the generator is fingered so have just put an new alternater in and the fuel tank was leaking from the top sender point so getting that all fixed and a few other little things.
Snaped the accelerator spring on the way so replaced that.
Also not happy with the paint in some areas so has to be redone. Then it's onto the interior - $$$
I was up at hervey bay on the weekend, was a great weekend.
Still sorting out a few probs with the bus, the generator is fingered so have just put an new alternater in and the fuel tank was leaking from the top sender point so getting that all fixed and a few other little things.
Snaped the accelerator spring on the way so replaced that.
Also not happy with the paint in some areas so has to be redone. Then it's onto the interior - $$$
- 4tune8
- DSKer
- Posts: 855
- Joined: Thu Mar 22, 2007 12:29 pm
- Location: melbourne
- Contact:
-
- DSKer
- Posts: 1218
- Joined: Tue Apr 03, 2007 5:00 pm
- Location: Sunshine Coast
- ppp
- DSKer
- Posts: 575
- Joined: Fri Sep 02, 2005 3:58 pm
- Location: Bangkok, Thailand.
- Contact:
-
- DSKer
- Posts: 1218
- Joined: Tue Apr 03, 2007 5:00 pm
- Location: Sunshine Coast
-
- DSKer
- Posts: 1218
- Joined: Tue Apr 03, 2007 5:00 pm
- Location: Sunshine Coast
- ppp
- DSKer
- Posts: 575
- Joined: Fri Sep 02, 2005 3:58 pm
- Location: Bangkok, Thailand.
- Contact: