Post pics and info of your rides here split windows only
Moderators: warb , Rawdyn , Leroy , byronbus , Tonz Magonz , dmb
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Tue Jul 05, 2011 10:55 pm
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Thu Jul 07, 2011 7:00 pm
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Thu Jul 07, 2011 7:07 pm
kombi1976
DSKer
Posts: 3744 Joined: Thu Jan 25, 2007 2:59 pm
Location: Southern Tablelands
Post
by kombi1976 » Thu Jul 07, 2011 8:52 pm
Looking tough as, ZP!
I love Radars.
Cheers & God Bless
'62 Beetle
'62 Panel project
'67 Panel
Ian 68
DSKer
Posts: 1373 Joined: Sat May 02, 2009 9:58 pm
Location: Caloundra, QLD
Post
by Ian 68 » Thu Jul 07, 2011 9:57 pm
Very nice mate.
Proudly sponsored by Cunado wear.
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Fri Jul 08, 2011 1:16 am
These wheels will set this off.
The wheel studs aren't long enough with the new wheels so I will need to sort out some longer ones.
scutemmm
DSKer
Posts: 303 Joined: Sat Dec 20, 2008 8:39 pm
Location: Batemans Bay
Post
by scutemmm » Sun Jul 10, 2011 6:01 pm
Those wheels are ace.What make and who supplies?
1967 panel
1957 FE Holden
Ducati ST2
BMW 325i
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Mon Jul 25, 2011 9:58 pm
Sorry for the late reply mate, they were from grwheels.com
Great service didn't take long to arrive.
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Tue Jul 26, 2011 8:32 pm
Spending the rest of the week on the bus AGAIN, did a few hours today...
Finally found all the parts I needed for the handbrake so it's all fitted up.
Also fitted the front calipers and got the wheels on the front.
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Tue Jul 26, 2011 8:34 pm
Couldn't help myself, had to fit the plates to give it a bit more of a finished look. Still far from finished but getting there.
Leroy
DSKer
Posts: 2544 Joined: Thu Jul 05, 2007 11:58 pm
Location: Brisbane (bayside)
Post
by Leroy » Tue Jul 26, 2011 8:55 pm
kai_surfer_guy
DSKer
Posts: 47 Joined: Wed Nov 05, 2008 5:19 am
Location: Penrith, Sydney
Post
by kai_surfer_guy » Wed Jul 27, 2011 3:26 pm
ii think you'll find you will have better cooling if you shroud the fans to the radiator. when the fans suck it will suck air over the whole rad. look in new cars thats how they are set up
Kai
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Wed Jul 27, 2011 9:22 pm
The radiator should be set up correctly, a fella with a massive amount of experience and has owned a radiator store in town for decades came out and made the radiator to suit.
This is set up very similar to the VW conversions I looked at on line.
Time will tell....
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Thu Jul 28, 2011 9:46 am
Spent a fair bit of time under the bus cleaning and getting ready for the radiator to be mounted and the side belly pans.
Had to move a couple of pipes around to make the room.
Put extra stell to brace the chasis
zeuspig
DSKer
Posts: 1218 Joined: Tue Apr 03, 2007 5:00 pm
Location: Sunshine Coast
Post
by zeuspig » Thu Jul 28, 2011 9:49 am