my $10,000 challenge with 61 Panel
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
- StenchOfGoat
- DSKer
- Posts: 1528
- Joined: Tue Mar 04, 2008 4:37 pm
- Location: Melbourne
- splitwannabe
- DSKer
- Posts: 288
- Joined: Wed Oct 13, 2010 8:01 pm
- Location: Bargara
- Ian 68
- DSKer
- Posts: 1373
- Joined: Sat May 02, 2009 9:58 pm
- Location: Caloundra, QLD
- joeM
- DSKer
- Posts: 288
- Joined: Mon Apr 04, 2011 10:22 pm
- Location: Melbourne Vic
Thanks Ian I'll see how it goes with the ones in first and let you know.Ian 68 wrote:Joe,
How'd you go with the bushes ? If your stuck and can get me the sizes I'll turn you up a couple..
Part 2 of the inner valance, I have a feeling this is going to have many parts
[youtube]http://www.youtube.com/watch?v=qwP14TBsY-0[/youtube]
- Tonz Magonz
- Mod
- Posts: 4085
- Joined: Tue May 17, 2005 9:13 pm
- Location: Melbourne mostly
- scutemmm
- DSKer
- Posts: 303
- Joined: Sat Dec 20, 2008 8:39 pm
- Location: Batemans Bay
-
- DSKer
- Posts: 2081
- Joined: Sun Jun 17, 2007 10:04 am
- Location: Bowral
- StenchOfGoat
- DSKer
- Posts: 1528
- Joined: Tue Mar 04, 2008 4:37 pm
- Location: Melbourne
- warb
- Mod
- Posts: 7518
- Joined: Mon May 16, 2005 5:15 pm
- Location: Penrith, Nsw, Australia
- Contact:
- joeM
- DSKer
- Posts: 288
- Joined: Mon Apr 04, 2011 10:22 pm
- Location: Melbourne Vic
OK I've gone through my recites and crunched some numbers.
The total to date is
$7585
This includes the recent purchase of the brake lines, mounts, engine bits n pieces and Paint
Major bits still to buy are
Cabin floor
both left and right inner outer lower dog legs (I've given up on expecting the outer dog leg from Bus Stop)
Cargo floor
cargo pillars
And then all the rubber sills
Shock absorbers
And some sort of front seat
And I'm sure a host of other bits that will surprise me
Umm somehow I;m not so confident any more
The total to date is
$7585
This includes the recent purchase of the brake lines, mounts, engine bits n pieces and Paint
Major bits still to buy are
Cabin floor
both left and right inner outer lower dog legs (I've given up on expecting the outer dog leg from Bus Stop)
Cargo floor
cargo pillars
And then all the rubber sills
Shock absorbers
And some sort of front seat
And I'm sure a host of other bits that will surprise me
Umm somehow I;m not so confident any more
- HELMUT
- DSKer
- Posts: 949
- Joined: Thu Oct 19, 2006 1:26 pm
- Location: CANBERRA
Good going Joe. Im going to have to do the nose on my panel at some stage so its good to see whats behind there.
I was just thinking after watching the last vid that if you are going to cut out the dog legs while you have everything else cut out it would be a good idea to weld a brace from the b pillar to the a pillar just to keep everything in shape. just a thought.
I was just thinking after watching the last vid that if you are going to cut out the dog legs while you have everything else cut out it would be a good idea to weld a brace from the b pillar to the a pillar just to keep everything in shape. just a thought.
- GFresh
- DSKer
- Posts: 1104
- Joined: Wed Apr 29, 2009 8:12 pm
- Location: Geelong Australia
- Contact:
- splitwannabe
- DSKer
- Posts: 288
- Joined: Wed Oct 13, 2010 8:01 pm
- Location: Bargara
- Tonz Magonz
- Mod
- Posts: 4085
- Joined: Tue May 17, 2005 9:13 pm
- Location: Melbourne mostly
Joe's deserves better than a park bench..GFresh wrote:I think Tonz may be able to get something for you if you get stuck herejoeM wrote: And some sort of front seat
Umm somehow I;m not so confident any more
He lives very close to a park and if the 8 Ball is anything to go off
I'm thinking an outdoor bench swing seat would fit the bill nicely...
Joe , shoot a pm to Elton re the panels..
If he has the stock,you wont do better than the funky green panels..
Wanted..Barny bits or 60's Supercharger other than Judson