65 High roof single cab - Now with pinstriping

Post pics and info of your rides here split windows only

Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb

User avatar
Kombi Trip
DSKer
Posts: 1493
Joined: Thu Dec 29, 2005 5:20 pm
Location: Far North QLD
Contact:

Post by Kombi Trip »

Dasdubber wrote:Wheels look familiar :)
Look forward to seeing them on the ute!
Al
you did a great job detailing and packing them for sure. 8)
Imagine what you would do if you knew you couldn't fail.
User avatar
Kombi Trip
DSKer
Posts: 1493
Joined: Thu Dec 29, 2005 5:20 pm
Location: Far North QLD
Contact:

Post by Kombi Trip »

It's been a while since I updated - but there have been some changes.
Will paint the column and gearshift (boot to go on too) plus 3 metal bars in the roof cards, clean up the visors and just about there.

Brick red and mesh red may not be everones taste - especially on a commercial - but :P I love it 8)

My initial plan was this colour - but I got grey roof cards and door cards and seat covers - well when the seat covers arrived they had pleats like a bay which I hated - so I sent back - roof cards I got were for a van - so also no good - and door cards needed to be cut down also - so I started again with my first plan.

Painted the door cards - again- ordered roof cards again - this time from Brad - and also got kick borads from Brad, and had a set of the brick red mesh red 1/3 and 2/3 seats I was planning to use on something else that died in the you know what. Anywho....

Kick boards and roof cards from Brad at busnbug were great
Rolf Harris shoulda used these roof cards as the wobble board sound out of these bad boys is so nice and the flex means you can fit them without them breaking apart - imagine that! Well done Brad. And the correct size too.

TMI seat covers were good - not perfect though
Door cards needed a lot of modifying.

The interior paint on this is so nice, but the old girl has had a tough life - lucky it was dry.
Attachments
still need to put the 3 metal bars in - paint it black and put it back.
still need to put the 3 metal bars in - paint it black and put it back.
august 2011 047.jpg (23.9 KiB) Viewed 4485 times
august 2011 045.jpg
august 2011 045.jpg (64.02 KiB) Viewed 4485 times
august 2011 039.jpg
august 2011 039.jpg (61.58 KiB) Viewed 4485 times
august 2011 043.jpg
august 2011 043.jpg (63.3 KiB) Viewed 4485 times
Imagine what you would do if you knew you couldn't fail.
User avatar
morts
DSKer
Posts: 2097
Joined: Sun Oct 29, 2006 9:22 pm
Location: McLaren Vale, South Australia

Post by morts »

Looking good Nick..... 8)
No matter what happens they can't take you out in the street and shoot you......
User avatar
brad@busnbug
DSKer
Posts: 1762
Joined: Tue May 17, 2005 6:45 pm
Location: Melburg
Contact:

Post by brad@busnbug »

Looking very red in there Nick. Can't quite pick it's Brick Red from the pics. Must look great live.
User avatar
Kombi Trip
DSKer
Posts: 1493
Joined: Thu Dec 29, 2005 5:20 pm
Location: Far North QLD
Contact:

Post by Kombi Trip »

maye this gives the colour a little better - I am no photographer :lol:
Attachments
the bars break up the colour a bit
the bars break up the colour a bit
august 2011 054.jpg (24.14 KiB) Viewed 4326 times
chewing the fat about future road trips perhaps?
chewing the fat about future road trips perhaps?
august 2011 052.jpg (67.89 KiB) Viewed 4326 times
august 2011 058.jpg
august 2011 058.jpg (74.51 KiB) Viewed 4326 times
never forget where you came from
never forget where you came from
august 2011 059.jpg (65.67 KiB) Viewed 4326 times
streeing column, pedals, hand brake got some black
streeing column, pedals, hand brake got some black
august 2011 055.jpg (57.12 KiB) Viewed 4326 times
Imagine what you would do if you knew you couldn't fail.
User avatar
brad@busnbug
DSKer
Posts: 1762
Joined: Tue May 17, 2005 6:45 pm
Location: Melburg
Contact:

Post by brad@busnbug »

Yeah that's better. Looks great. Works well with the white.
Need to pull that driver's seat base cover in at the sides. Did you put short wires through the holes in the sides of the frame? There's two each side.
Did a great job covering the rest.
User avatar
Kombi Trip
DSKer
Posts: 1493
Joined: Thu Dec 29, 2005 5:20 pm
Location: Far North QLD
Contact:

Post by Kombi Trip »

OK exciting stuff -well for me anyway - I have got rego :D Look for me in trips with splits - the section of this site that is really what it is all about after all. 8)

This is going to be a daily driver too. School drop off Monday is going to be a laugh. :lol: Have used it to pick up stuff from Bunnings etc Still a few things to get sorted but the biggest hurdle has been cleared with the Governmet tick.

I bought the 'Filmore' plate (watch the Cars movie and look at his rego) a while back (before they were stupid $ :shock: ) when I had a green split van - old plates really set off the older car nicely.

I think I will end up with the original wheels with old white walls soon but these rims had new rubber for rego. I really like the old ratty deluxe badge too but have a rather interesting alternate i may try out.

The bottom line is that another kombi has found its way out of the scrub has hit the road again.

A kombi should have a name.
I give you "Coober".
Attachments
morris8 006 (2).jpg
morris8 006 (2).jpg (69.07 KiB) Viewed 4221 times
morris8 004.jpg
morris8 004.jpg (72.62 KiB) Viewed 4221 times
morris8 002.jpg
morris8 002.jpg (80.49 KiB) Viewed 4221 times
Imagine what you would do if you knew you couldn't fail.
User avatar
morts
DSKer
Posts: 2097
Joined: Sun Oct 29, 2006 9:22 pm
Location: McLaren Vale, South Australia

Post by morts »

'Tis a great thing Nick!!

The roof card divider bars make a real difference to the interior and look great.

Are you go to lower it at all or keep it stock height and on historic rego?
No matter what happens they can't take you out in the street and shoot you......
User avatar
warb
Mod
Posts: 7518
Joined: Mon May 16, 2005 5:15 pm
Location: Penrith, Nsw, Australia
Contact:

Post by warb »

nice one, looking forward to seeing in the flesh at day of ;) ;)
User avatar
matara
Admin
Posts: 1472
Joined: Wed May 18, 2005 11:34 pm
Location: Wahroonga, Sydney
Contact:

Post by matara »

Is that an early Eriba Puck caravan sat next to it? Looks great

STeve
User avatar
63single
DSKer
Posts: 78
Joined: Tue May 26, 2009 9:34 pm
Location: South Australia

Post by 63single »

great stuff nick should catch up and go for a cruze

ramzi
hurricane
DSKer
Posts: 143
Joined: Sun Feb 01, 2009 5:41 pm
Location: Adelaide

Post by hurricane »

shit hot Nick. Hope to see it round.
User avatar
kombi1976
DSKer
Posts: 3744
Joined: Thu Jan 25, 2007 2:59 pm
Location: Southern Tablelands

Post by kombi1976 »

Very nice there, mate.
It's always nice to have a project on the road.
Have you thought about some pinstriping?
It would really set it off.
Cheers & God Bless

'62 Beetle
'62 Panel project
'67 Panel
User avatar
brad@busnbug
DSKer
Posts: 1762
Joined: Tue May 17, 2005 6:45 pm
Location: Melburg
Contact:

Post by brad@busnbug »

Always a great sense of achievement to drive off fully registered and legal. Congrats Nick. Love the wheels. Give him a 'kinda sporty' look.
User avatar
Kombi Trip
DSKer
Posts: 1493
Joined: Thu Dec 29, 2005 5:20 pm
Location: Far North QLD
Contact:

Post by Kombi Trip »

Thanks for all of the feedback gentlemen.
It was a great relief to get the ute on the road - I was just about over it. Because it had had previous rego in SA it was a basic ID check. The only issue they had was that I needed to run a 20mm mig bead on a seam inside the cab - above passenger door, then brought it back an hour later and straight through :shock: :lol: Always pays to be freindly and polite.

Sorry Warb, won't be making it to 'day of'. Have a gearbox issue and would be suffering industrial deafness when I got there. Will send you a pm re stickers.

Plan is for stock height Morts. Probably stock rims (see my avatar) , and probably back to a singleport motor too. This may depend on gearbox so may end up irs - but have that much invested into my reduction hubs that it would be admitting defeat sort of - although I do have all of the irs stuff and a narrow, lowered front beam .... :idea:

Ramzi - lets cruise to Volksfest in a few weeks. See events - meeting at Marion.
Imagine what you would do if you knew you couldn't fail.
Post Reply