58 DD Panel

zeuspig · Post by **zeuspig** » Sat Oct 01, 2011 12:14 pm

Nothing too exciting to report but spent a fair bit of time cleaning up the inside rear and getting it ready for some paint. Stripped it right back.

resol · Post by **resol** » Sun Oct 02, 2011 6:08 am

Looking SMICK Zp
I've put a set of creatives on and they are great.. (except the center bracket)

Ian 68 · Post by **Ian 68** » Sun Oct 02, 2011 11:15 am

Close now Brad.

zeuspig · Post by **zeuspig** » Mon Oct 03, 2011 10:15 am

Very close, getting a bit excited now.

What was wrong with the centre bracket?

resol wrote:Looking SMICK Zp
I've put a set of creatives on and they are great.. (except the center bracket)

zeuspig · Post by **zeuspig** » Tue Oct 25, 2011 11:41 am

Spent a fair bit of time rubbing and preparing the inside.

Coat of paint

kombi1976 · Post by **kombi1976** » Tue Oct 25, 2011 12:42 pm

Looking good, zp.

zeuspig · Post by **zeuspig** » Thu Oct 27, 2011 6:32 pm

Repaired more rust

Completed all the painting for the inside

zeuspig · Post by **zeuspig** » Thu Oct 27, 2011 6:34 pm

Fitted all handles and inner locks

Side mirrors and windscreen wipers

zeuspig · Post by **zeuspig** » Thu Oct 27, 2011 6:41 pm

Replaced the torsion rubbers inner and outer.

zeuspig · Post by **zeuspig** » Thu Oct 27, 2011 6:44 pm

Bit of the good stuff

Fitted iot back up and lowered the rear.

Still up for suggestions on the TEXACO signwriting if anyone has more suggestions??

zeuspig · Post by **zeuspig** » Tue Nov 01, 2011 8:09 pm

Had a bit more of a play today.
Had to fix these, someone had mounted seatbelts. Looks ugly.

Stuck a bolt in.

Cut

Welded

zeuspig · Post by **zeuspig** » Tue Nov 01, 2011 8:10 pm

Grinded and patched

[/I]

Front shocks in

Rear mounts in and shocks fitted

zeuspig · Post by **zeuspig** » Tue Nov 01, 2011 8:13 pm

Spent alot of time doing the underbody black/deadner. Hit all the insides if the doors with fish oil.

Made up somemore brackets underbeath, finished off the surround for the radiator.

Fitted up the starter motor

Auto electrician came out and viewed the bus, looks like he will be taking it soon.

zeuspig · Post by **zeuspig** » Tue Nov 01, 2011 8:16 pm

Ian 68 · Post by **Ian 68** » Tue Nov 01, 2011 8:24 pm

Bloody hell Brad, that looks good now mate

Well done Fella, good work