Interior is pretty clean (but bare). Some damage to LH front and floor pan.
The rear seat area is pretty clean but there are a few rust holes on the drivers-side floor and lower wall.
Engine bay is cleaner than some I've seen, but just lacks an engine.
The left hand and rear drop gates work well, as do the latches. RHS missing.
Roof and gutters only have minor surface rust.
Unfortunately the axle beams have been cut from the chassis beams. Hopefully repair sections can be found somewhere. Does anybody know what these sections are called and if they make them after-market???
There's bad rust on the bottom of both sides of the cab side panels, and the nose cone looks like its been kicked in, as well as running into something on the lower LHS, and probably needs replacing. For some reason they've also cut off the louvered sections on each side of the engine bay and welded in a solid piece, so these also need replacing.
Rear cargo deck is pretty solid, apart from a few holes and a patch of rust in the back LH corner.
Finally, the front doors are pretty buggered. Look like they've been jumped on. Probably not salvageable.
[/img]
..rear torsion housing has to be located from another bus , same as front sections where beam bolts up and steering box location , you would basically need a donor bus like the sc that was on ebay a few days ago from dubbo , is that it or does it have seats ? as these can be the hardest to find and expensive , on price with all the bits thats missing which you would have to refit using a jig to get everything located again and if no seats or bumpers were with it I'd say 2-10k depending on what he paid for it , 
...swapsee's you know u want to...owes me 3500 call me 0428 427 986 ha ha
