Introducing 'Manfred'

Post pics and info of your rides here split windows only

Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb

Post Reply
woval56
DSKer
Posts: 179
Joined: Mon Jun 13, 2011 12:14 am

Post by woval56 »

looking good Kent,
coming together nicely,
willwood clutch? how does that work, any mods needed inside the bell housing?
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

clutch pic

Post by thebear »

Clutch set up.
Image
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

Update

Post by thebear »

Things are progressing nicely. Cruised down on Sat. Thanks to Al and Steve for letting us hang out and put in some hours. Valla is still the target and time is ticking. Starting to think about details but still a lot to be done.

Clutch Reservoir
Image

Front and rear seat belt mounts.
Image
Image

Custom shift rod. The old one was rusted which gives an idea of how bad the underside was. Custom made by DAS.
Image
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

cooler and safaris

Post by thebear »

Custom oil cooler tucked away.
Image
Image
Trial fit of front safaris
Image
Image
New fuel tank fitted.
Image
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

Red9 shots

Post by thebear »

A few more Red9 shots. Fitted the 17" smoothies up for a look. Offset is ok and they are phat but will stick with Empi's.
Image
Image
Image
Image
Image
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

Rear end

Post by thebear »

New tank
Image
Rear end
Image
Image
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

Paint and panel

Post by thebear »

The paint and panel plan was to cut back the dodgy 80's aqua repaint and find the original sea blue lurking somewhere underneath. A bit of hard work but do-able. A sort of rat / original look with the van making its statement on the underside.

Unfortunately, after all the rust repairs to the lower half, a new (old) front door, the nose being stripped to metal, the roof having no original paint left, the aqua and primer forming a good bond and previous body work, it was tough going getting a decent finish. We sanded back a few spots and the sea blue was there in patches but not the look we were going for. I probably would have settled for a top coat of ankor wax but after a chat with Al, the Minister for War and Finance was not having it.

Plan B? Manfred will be given a once over with the 240 orbital in preparation for some satin sea blue. An original look in the original colour highlighted by a deluxe trim and chrome bits and pieces. Shiny Empi's will compliment the satin paint. Maybe even some sign writing....

Shots show some before and after.
Attachments
Man RHS full shot.jpg
Man RHS full shot.jpg (64.47 KiB) Viewed 2913 times
Man LHS part done.jpg
Man LHS part done.jpg (53.36 KiB) Viewed 2913 times
Man LHS damage1.jpg
Man LHS damage1.jpg (44.84 KiB) Viewed 2913 times
Man LHS damage.jpg
Man LHS damage.jpg (39.71 KiB) Viewed 2913 times
Man RHS paint .jpg
Man RHS paint .jpg (48.98 KiB) Viewed 2913 times
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

Hows it sit?

Post by thebear »

Tried out the wheels and tyres with the current suspension set up. Still plenty of height available either way and fine tuning will determine exactly where it ends up. Rims a 15x5.5 Empi's with 185/65 tyres. this will allow plenty of clearance at the front but the rears look a little under tyred so might try to squeeze some 205 or 215's under the back.
Attachments
Close up1.jpg
Close up1.jpg (42.33 KiB) Viewed 2910 times
Close up.jpg
Close up.jpg (80.96 KiB) Viewed 2910 times
Side view .jpg
Side view .jpg (50.81 KiB) Viewed 2910 times
Side view1.jpg
Side view1.jpg (55.51 KiB) Viewed 2910 times
Close up RHS.jpg
Close up RHS.jpg (74.97 KiB) Viewed 2910 times
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
Frogsta
DSKer
Posts: 1448
Joined: Wed May 18, 2005 8:07 pm
Location: Moffat beach Q.L.D Straylia.

!

Post by Frogsta »

MMMmmm...satin sea blue.
You still need a rear door mech?
"-Hannovermetalmadness-"(Debilitating desease with no known cure).
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

Post by thebear »

Yep. Got one?
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
FrankenCab
DSKer
Posts: 3528
Joined: Wed Apr 18, 2007 8:55 pm

Post by FrankenCab »

gettin there , but rear arch should be closer to the centre cap :wink: how much lower can it go ?
Straight axle is better than IRS
User avatar
Frogsta
DSKer
Posts: 1448
Joined: Wed May 18, 2005 8:07 pm
Location: Moffat beach Q.L.D Straylia.

!

Post by Frogsta »

No doubt, how soon is it needed?.
"-Hannovermetalmadness-"(Debilitating desease with no known cure).
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

Post by thebear »

Couple of weeks. Happy to come up the hill and grab it. Let me know.
K
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
User avatar
Frogsta
DSKer
Posts: 1448
Joined: Wed May 18, 2005 8:07 pm
Location: Moffat beach Q.L.D Straylia.

!

Post by Frogsta »

Come for a visit on the weekend if you like.
I've got all the same running gear exept they did not have the rear red 9 so I went 69 irs.
Looking forward to seeing Manfred on the local streets soon.
"-Hannovermetalmadness-"(Debilitating desease with no known cure).
User avatar
thebear
DSKer
Posts: 426
Joined: Sun May 23, 2010 3:26 pm
Location: Sunshine Coast QLD

Body prep for paint

Post by thebear »

A little more body prep required before a quick spray. A deluxe trim will be fitted so the belt line has to be fixed in a few places including the front door. Lower section also done - DAS don't do things by halves! It should be noted that its my choice to do minimal prep and a quick spray. The many imperfections will be all part of the character and are not a reflection on the painter or shop. It's still way more than colour than i thought i'd see on this bus.

Image
Image
Belt line repaired from the inside.
Image
Image
A little filler and presto...
Image
The ad said rust only in the usual places...
71 Type 3 wagon "Paddy"
65 11 window "Manfred" by DAS
56 Panel. One day......
Post Reply