'57 Resto
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
Kolo
- DSKer
- Posts: 55
- Joined: Tue Mar 19, 2013 7:34 am
- Location: Hunter Valley NSW
-
Kolo
- DSKer
- Posts: 55
- Joined: Tue Mar 19, 2013 7:34 am
- Location: Hunter Valley NSW
Re: '57 Resto
It's been a while but I've been able to get some work done.
Finally got the headlight buckets finished.
Finally got the headlight buckets finished.
- Attachments
-
-
-
Kolo
- DSKer
- Posts: 55
- Joined: Tue Mar 19, 2013 7:34 am
- Location: Hunter Valley NSW
Re: '57 Resto
Did some work on the cargo doors. I'm not rushing ahead and completing them completely as I want to get to a point with a number of parts where I can treat the inside of the frames all at once. Probably using KBS, to try and minimise the rust returning.
- Attachments
-
-
-
-
- Panel needed adjusting to fit correctly
-
-
-
-
-
Kolo
- DSKer
- Posts: 55
- Joined: Tue Mar 19, 2013 7:34 am
- Location: Hunter Valley NSW
Re: '57 Resto
Started to work on the passenger side cargo door. Rusted out at the bottom. Needed to fabricate the inner hinge strengthener as it was completely rusted through.
The drivers side door is a little worse and I may need to find a donor.
The drivers side door is a little worse and I may need to find a donor.
- Attachments
-
-
-
-
-
- I have no access to a bead roller, so I welded in a length of 6mm round bar to stiffen the part
-
-
-
- The piece has been rust converted, hence the strange colour
-
-
-
DRHEMS3
- DSKer
- Posts: 127
- Joined: Tue Jul 16, 2013 4:56 pm
- Location: South Coast NSW
Re: '57 Resto
Those headlight buckets man!
From what they were, To what they are now!
Great job! Keep it up
From what they were, To what they are now!
Great job! Keep it up
-
kombi niko
- DSKer
- Posts: 1403
- Joined: Sat Mar 30, 2013 4:28 pm
- Location: Mornington peninsula
- Contact:
Re: '57 Resto
nice job on those door hinge stiffeners those things suxed to make!!
-
Kolo
- DSKer
- Posts: 55
- Joined: Tue Mar 19, 2013 7:34 am
- Location: Hunter Valley NSW
Re: '57 Resto
Happy new year DSK'ers
Been slowly plodding along. Mainly trying to find bits I need and repair things I'm able to. Basically rebuilt the rear valance now working on door tops. Pretty rusted but gonna have a go at repairing. Quarter windows are rusted, and the threaded pins on the bottom are rusted away. Can anyone provide a photo of the bottom thread of the quarters with some measurements, from different angles would be good and possibly thread size.
Also does my one know if the profile of a ute tray panel is the same profile as the horizontal firewall of a Kombi, mine is missing and replacement seems to be hard to come by.
I'll post some photo updates when I get a chance
Been slowly plodding along. Mainly trying to find bits I need and repair things I'm able to. Basically rebuilt the rear valance now working on door tops. Pretty rusted but gonna have a go at repairing. Quarter windows are rusted, and the threaded pins on the bottom are rusted away. Can anyone provide a photo of the bottom thread of the quarters with some measurements, from different angles would be good and possibly thread size.
Also does my one know if the profile of a ute tray panel is the same profile as the horizontal firewall of a Kombi, mine is missing and replacement seems to be hard to come by.
I'll post some photo updates when I get a chance
-
paul willans
- DSKer
- Posts: 2081
- Joined: Sun Jun 17, 2007 10:04 am
- Location: Bowral
Re: '57 Resto
Panel is not the same
clk500 AMG
64 s Notch
57 Boronia Brown bus
59 Pmg ute
62 Beryl Green bus
64 s Notch
57 Boronia Brown bus
59 Pmg ute
62 Beryl Green bus