1962 resto !
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
- DSKer
- Posts: 17
- Joined: Wed Feb 05, 2014 8:26 am
1962 resto !
Hi I'm Jack,
Just thought I would share my project up here and see if there is any advice or comments , I just joined and im in early stages of resto but really enjoying it.
Cheers
jack
Just thought I would share my project up here and see if there is any advice or comments , I just joined and im in early stages of resto but really enjoying it.
Cheers
jack
- scotty*85vw
- DSKer
- Posts: 1278
- Joined: Thu Sep 09, 2010 9:34 pm
Re: 1962 resto !
looks better than most. good work man.
- kombi niko
- DSKer
- Posts: 1403
- Joined: Sat Mar 30, 2013 4:28 pm
- Location: Mornington peninsula
- Contact:
Re: 1962 resto !
nice bus, whats the plans for it?
- tar76
- DSKer
- Posts: 740
- Joined: Mon Dec 07, 2009 3:41 pm
- Location: Ningi Qld
Re: 1962 resto !
Good to see that blue come off it.
62 Single Cab.
Triumph thunderbird bobber
62 XL falcon.
And for F#%k sake no peace signs!!
Triumph thunderbird bobber
62 XL falcon.
And for F#%k sake no peace signs!!
- Leroy
- DSKer
- Posts: 2544
- Joined: Thu Jul 05, 2007 11:58 pm
- Location: Brisbane (bayside)
Re: 1962 resto !
Looks like a nice solid start! As Tarin said, good to see that horrible Blue gone
2018 Year of the Barndoor
- Cam Biscuit
- DSKer
- Posts: 1523
- Joined: Sun Feb 26, 2012 4:56 pm
- Location: Radelaide
Re: 1962 resto !
Ditto That ^^ looking goodtar76 wrote:Good to see that blue come off it.
-
- DSKer
- Posts: 17
- Joined: Wed Feb 05, 2014 8:26 am
Re: 1962 resto !
Cheers for feed back !
Yeah that blue was shit and was a bitch to get off was thick and really baked on!
Plans are to fix all rust just buying mig etc in next few days, then get body ready for paint . Then the paint. That will keep me busy for a while and give me a chance to research and get advice on rest of bus , ie engine , suspension.
Initial thoughts were crate motor from states , sticking with kombi engine with approx 2ltr.
Suspension I liked the red9 bolt in stuff front and rear but there pricey and not sure with getting them engineered in nsw. Might look at easier cheaper options.
I still have all parts to complete bus so will try revamp a lot of original parts to keep that original character. But would like it sitting lower with a nice set of rims.
I have just started buying some auto craft panels so will see how they fit in , looking forward to getting the big girl moving forward.
Cheers jack
Yeah that blue was shit and was a bitch to get off was thick and really baked on!
Plans are to fix all rust just buying mig etc in next few days, then get body ready for paint . Then the paint. That will keep me busy for a while and give me a chance to research and get advice on rest of bus , ie engine , suspension.
Initial thoughts were crate motor from states , sticking with kombi engine with approx 2ltr.
Suspension I liked the red9 bolt in stuff front and rear but there pricey and not sure with getting them engineered in nsw. Might look at easier cheaper options.
I still have all parts to complete bus so will try revamp a lot of original parts to keep that original character. But would like it sitting lower with a nice set of rims.
I have just started buying some auto craft panels so will see how they fit in , looking forward to getting the big girl moving forward.
Cheers jack
- kombi niko
- DSKer
- Posts: 1403
- Joined: Sat Mar 30, 2013 4:28 pm
- Location: Mornington peninsula
- Contact:
Re: 1962 resto !
sounds good cant wait to see progress pics.
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
Re: 1962 resto !
I would talk to rod pen rose before importing an engine, not much more $ and at least you have service if something goes wrong
Its a well known fact an OG SC will always be worth more than a DC with a checker plate tray, towel rails and PINK plates
- tar76
- DSKer
- Posts: 740
- Joined: Mon Dec 07, 2009 3:41 pm
- Location: Ningi Qld
Re: 1962 resto !
I would have a chat to Rod Penrose first as you'll get a good motor from him
If your going to buy from the states check these guys out http://shop.powerhausvwparts.com/2110cc ... 2332LB.htm
If your going to buy from the states check these guys out http://shop.powerhausvwparts.com/2110cc ... 2332LB.htm
62 Single Cab.
Triumph thunderbird bobber
62 XL falcon.
And for F#%k sake no peace signs!!
Triumph thunderbird bobber
62 XL falcon.
And for F#%k sake no peace signs!!
-
- DSKer
- Posts: 17
- Joined: Wed Feb 05, 2014 8:26 am
Re: 1962 resto !
Hi.
Got some progress pics to show , progress has been slow as I had to save up for welder , air compressor etc but she is on the move again!!!
Purchased rotisserie then fabricated brackets then mounted. Can spin it and pin it on my own so happy with that.
Now the rust repairs can begin underneath
Jack
Got some progress pics to show , progress has been slow as I had to save up for welder , air compressor etc but she is on the move again!!!
Purchased rotisserie then fabricated brackets then mounted. Can spin it and pin it on my own so happy with that.
Now the rust repairs can begin underneath
Jack
- 067DUB
- DSKer
- Posts: 2895
- Joined: Mon Oct 24, 2011 5:09 pm
Re: 1962 resto !
nice!
- FrankenCab
- DSKer
- Posts: 3528
- Joined: Wed Apr 18, 2007 8:55 pm
Re: 1962 resto !
If you want to do basic suspention to get it on the rd just fit adjusters to beam and flip spindles , lower the redux hubs , straight axle or IRS ..plenty of options to suit a budget ..great starting base though
Straight axle is better than IRS
- Ted2
- DSKer
- Posts: 657
- Joined: Fri Mar 07, 2008 4:24 pm
- Location: Sunshine Coast QLD
Re: 1962 resto !
Was this bus originally from Bathurst ?
- byronbus
- Admin
- Posts: 7840
- Joined: Mon May 16, 2005 10:45 pm
- Location: Byron Bay
Re: 1962 resto !
I have a pic of that bus in Byron Bay years ago, maybe 15 years ago...