pg/sg 55
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
For u Linz.
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
Finally started the cleaning process. Don’t uave the luxury of a sandblasted, nor wanted to use one to save sand getting into it.
Then came across this.
Could cut and weld it up, but I don’t know if it’s out of shape, and don’t want to fuck the front end geometry..
So had to start on this one then. Also from a 55 Wolfsburg bus so not complaining. Not the og one but still happy.
And apart, again....
Hopefully this one will be good.
Then came across this.
Could cut and weld it up, but I don’t know if it’s out of shape, and don’t want to fuck the front end geometry..
So had to start on this one then. Also from a 55 Wolfsburg bus so not complaining. Not the og one but still happy.
And apart, again....
Hopefully this one will be good.
- FrankenCab
- DSKer
- Posts: 3528
- Joined: Wed Apr 18, 2007 8:55 pm
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
Could do that, or just use another 55 beam and know that it hasn’t been crackedFrankenCab wrote:It's not a racecar or Camry just weld it up
-
- DSKer
- Posts: 25
- Joined: Mon Jan 04, 2010 8:12 pm
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
Thanks mate.
Havnt started the body, still searching for parts.
Finally found the correct snowflake kickpanel in good shape and original colour also.
Havnt started the body, still searching for parts.
Finally found the correct snowflake kickpanel in good shape and original colour also.
- MID WEST DUBBER
- DSKer
- Posts: 1336
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: pg/sg 55
Lovely work Dion
- jvm
- DSKer
- Posts: 618
- Joined: Thu Jun 19, 2008 6:07 pm
- Location: Brisbania
Re: pg/sg 55
Good score. It looks in great condition.
Not easy to find especially in such good condition
Not easy to find especially in such good condition
58 Flash
66 11 Window
69 Single Cab
19 Arteon
66 11 Window
69 Single Cab
19 Arteon
- warb
- Mod
- Posts: 7518
- Joined: Mon May 16, 2005 5:15 pm
- Location: Penrith, Nsw, Australia
- Contact:
Re: pg/sg 55
thats a sweet thing.
- Wassa
- DSKer
- Posts: 332
- Joined: Mon Dec 09, 2013 9:40 pm
- Location: BRISBANE
Re: pg/sg 55
Enjoying the photos ..
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
Went out to see the bus for the 1st time in ages, not as bad as I remember, but still a bunch of work to do to it..
Doors are all good.
Only a couple small spots, this is the worst.
Doglegs need patching, or replacing.
Nose needs lower.
Floors, fronts shit, rear may be able to save in parts.
Batt trays could be patched.
Rear corners could be cut, or patched up in places.
Roof has a hole.
Short side sill.
Parcel tray.
Bulkheads cut.
Windscreen bottoms..
Under both front arches looks bad
Hope the chassis is ok, won’t know till I get into it properly tho. Best thing is the long side sill!! So hopefully won’t have to touch it. Need to get into it soon.
Doors are all good.
Only a couple small spots, this is the worst.
Doglegs need patching, or replacing.
Nose needs lower.
Floors, fronts shit, rear may be able to save in parts.
Batt trays could be patched.
Rear corners could be cut, or patched up in places.
Roof has a hole.
Short side sill.
Parcel tray.
Bulkheads cut.
Windscreen bottoms..
Under both front arches looks bad
Hope the chassis is ok, won’t know till I get into it properly tho. Best thing is the long side sill!! So hopefully won’t have to touch it. Need to get into it soon.
-
- DSKer
- Posts: 1640
- Joined: Sat Jul 15, 2006 3:58 pm
Re: pg/sg 55
That looks real solid, just needs a new front, front floor , bulkhead, doglegs, cargo floor, roof repair , outriggers, cargo door repairs, lower A, B and C pillars, battery tray, lower rear corners, an a parcel tray, how's the engine lid look?
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
New, or just fix what’s there!
Engine lid an tailgate are perfect also!
Engine lid an tailgate are perfect also!
-
- DSKer
- Posts: 1640
- Joined: Sat Jul 15, 2006 3:58 pm
Re: pg/sg 55
Get in there mate an start welding, big project, make sure you do something on it each day
- Shaven
- DSKer
- Posts: 7420
- Joined: Tue Sep 19, 2006 4:17 pm
Re: pg/sg 55
lmfao ... needs the go to a sand blaster... then see whats left overvanell wrote:That looks real solid, just needs a new front, front floor , bulkhead, doglegs, cargo floor, roof repair , outriggers, cargo door repairs, lower A, B and C pillars, battery tray, lower rear corners, an a parcel tray, how's the engine lid look?
Only those whom drive a Dual Cab, Know what real driving is all about