The other 61 Ute

[vanell]

This is the other 61 Ute I have, I got it from Jamie with my brother’s 65 Ute, it’s the one on top

79D991E0-EC93-4853-A974-8D7395FDD7EB.jpeg (113.2 KiB) Viewed 10598 times

[vanell]

I put it in the shed today and I might have a go at welding it up for the next week or so

0ADBFE4D-EEA3-4576-BF20-1090FBE7C454.jpeg (104.95 KiB) Viewed 10597 times

1A8B0049-AA7C-40BC-84DB-30F1F6276BF6.jpeg (99.97 KiB) Viewed 10597 times

0A9D3321-50AC-4BEC-A617-759D86F843BF.jpeg (106.8 KiB) Viewed 10597 times

[warb]

tidy, a tray extension?, flat top car carrier..

[vanell]

tidy, a tray extension?, flat top car carrier..

This one will be just a standard Ute, I have a big but trans for it, drum brakes, standard height, only thing not sure of is the paint colour, originally it was a light green.

[Beatts]

Was it this green Wiz?
For what it’s worth this colour with a white roof would look killer.

EB58C03B-A59C-4207-8B95-79385A4CA21B.jpeg (181.35 KiB) Viewed 10562 times

[vanell]

Might leave the colour up to the next owner, I have too many projects and not enough time, I plan to weld all the parts that I have for it and put it up for sale, I need more money to finish the 15 window. Today I got most of the x-members and outriggers on and fixed the shift rod tube and got the heater tube in, then I test fitted the floor

B18D1679-FE0D-4BA4-8948-7067655E13FE.jpeg (120.87 KiB) Viewed 10511 times

419A5F6A-55E5-4F8B-BA97-94CF914EDA86.jpeg (113.69 KiB) Viewed 10511 times

[Shaven]

Stunning work buddy

[vanell]

Bit more done today, just cutting up patches and tacking or text screwing them on, decided to make it a double treasure chest door

DB100D10-90C7-4AC2-997C-23A0D4A9EB58.jpeg (76.28 KiB) Viewed 10469 times

[vanell]

The inside frame of the load bed will need a bunch of work done to it , I bent up some new inner panels for it so before I do that I had a go at test fitting it, now I was at bit stuck on how to get the length and height so I asked Cooper and he said just use a side gate, line up the swage with the door and square it up to the cabin, it’s like he has 30 years experience except he is only 25! Worked out great

C66F1546-77A6-47B5-ADB4-42BDBACD011E.jpeg (116.74 KiB) Viewed 10440 times

4A0E8395-8B8A-4FF6-8427-847031BF01C7.jpeg (115.17 KiB) Viewed 10440 times

[warb]

nice, sometimes the obvious approach comes from fresh eyes, nice one man.

[vanell]

Now I’m getting somewhere, starting to get the gaps right, got the tray at the right height now and worked out the length

CC34848B-B841-4811-ABAC-F87FEDDA7E6C.jpeg (96.87 KiB) Viewed 10388 times

[griffiths_r]

Seriously amazed how you can create something like that with so little to start with!!!

[vanell]

Hey Rich, this way saves cutting out the rust. As I’m doing this today I was thinking how good would it be if I welded up a 59 seamed roof, seamed gate Dual Cab, I think I have finally talked my mate in Melbourne to sell me his 57 single cab cabin and I already have the back part of a dual cab, Cooper has a complete chassis, how hard could it be?

[splitthis]

Hey Rich, this way saves cutting out the rust. As I’m doing this today I was thinking how good would it be if I welded up a 59 seamed roof, seamed gate Dual Cab, I think I have finally talked my mate in Melbourne to sell me his 57 single cab cabin and I already have the back part of a dual cab, Cooper has a complete chassis, how hard could it be?

We can call it a Winz

[vanell]

We can call it a Winz
[/quote]

I like it, plates are available

9C25B779-99F6-461A-B29A-421EA8819DEE.png (108.8 KiB) Viewed 10361 times