60 Micro Bus

vanell · Post by **vanell** » Fri Sep 24, 2021 6:14 pm

A bit of old school cad drawing

: 644CB61E-9F87-4CAB-B778-BB064D60C9AB.jpeg (110.05 KiB) Viewed 11225 times

. I also installed the bottom stop, it’s removable so I can swing the arm down more to get the tyres off

: C5A859DD-2F9B-4F78-8268-71897067C3E5.jpeg (109.77 KiB) Viewed 11225 times

. Check out the OG overspray!

MID WEST DUBBER · Post by **MID WEST DUBBER** » Fri Sep 24, 2021 7:23 pm

That’s a great idea Ian, coming along well

vanell · Post by **vanell** » Tue Oct 05, 2021 4:48 pm

Drove it around the block, it’s no where even close to being finished but at least it’s easier to move around

: 656ABB73-A776-402E-9F9B-C9B1DE4A918C.jpeg (148.77 KiB) Viewed 11137 times

1958kafer · Post by **1958kafer** » Tue Oct 05, 2021 8:34 pm

Awesome Ian! Sits perfect.

Beatts · Post by **Beatts** » Fri Oct 08, 2021 10:15 pm

Yeah! The stance is perfect

Shaven · Post by **Shaven** » Wed Oct 13, 2021 2:14 am

Looks stunning buddy... love that stance Ian.

vanell · Post by **vanell** » Sat Jan 29, 2022 9:05 pm

Swapped the wheels over on the red bus today, apparently the guy at the rego branch doesn’t like my Porsche wheels!

: 91A4479F-0B7F-4EFC-8E5D-81D6CEB02C43.jpeg (158.77 KiB) Viewed 10701 times

: 25452DB3-7782-4CB0-A130-D68244440352.jpeg (161.16 KiB) Viewed 10701 times

red hot bus · Post by **red hot bus** » Sat Jan 29, 2022 10:05 pm

Looks good but unless your painting the top half white black out that pop out

griffiths_r · Post by **griffiths_r** » Sun Jan 30, 2022 9:14 am

Love the ride height!

Assume high enough to get over speed humps with passengers?

(Everyone thinks I'm nuts when actively trying to avoid speed humps in the 911... Ok when it's just me, but feels like my soul being scraped off when I bottom it out with passengers). Can't bring myself to raise it though.

vanell · Post by **vanell** » Sun Jan 30, 2022 10:01 am

Yeah plenty of ride height, about 120mm underneath with the raised front beam and I raised the rear shocker mount, the taller front tyres may rub, have to see how that goes, only been around the block a few times. Interior seats still need to be done and I have to make up my mind on 2 tone paint or not, could be a while till it’s finished. Ian

MID WEST DUBBER · Post by **MID WEST DUBBER** » Sun Jan 30, 2022 10:56 am

The BRM’s look great Ian

griffiths_r · Post by **griffiths_r** » Sun Jan 30, 2022 4:48 pm

vanell wrote: ↑Sun Jan 30, 2022 10:01 am Yeah plenty of ride height, about 120mm underneath with the raised front beam and I raised the rear shocker mount, the taller front tyres may rub, have to see how that goes, only been around the block a few times. Interior seats still need to be done and I have to make up my mind on 2 tone paint or not, could be a while till it’s finished. Ian

Just checked... No passengers the 911 has 90mm at it's lowest point... So 120 sounds good.

vanell · Post by **vanell** » Mon Jan 31, 2022 8:09 pm

Been putting this off for a while, dunno why, in the end wasn’t that hard, front seat done and rear bottom seat, might have a go at the rest tomorrow

: 4A66F4C0-E1F4-4B18-9D86-B6F5D9EB7486.jpeg (108.26 KiB) Viewed 10647 times

: 78871309-096B-4816-A608-3E0758A3F49C.jpeg (88.99 KiB) Viewed 10647 times

braddick · Post by **braddick** » Mon Jan 31, 2022 9:12 pm

Mmmmm that looks nice

Beatts · Post by **Beatts** » Mon Jan 31, 2022 10:52 pm

Looks great Wiz. Seat colour works well, good choice

60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus

Re: 60 Micro Bus