58 mingo mango

[D-Train]

Good for hot toes!!! Looking pretty good brad!

I’m surprised u didn’t comment on the pgsg rear seat I have

Looking to swap for a Carmel if anyone keen
Cheers

We’ve discussed it before..

[braddick]

Working away at fitting this centre belly pan
Making it removable if you ever need to access the clutch or handbrake tubes
Welded tabs down the chassis rails and used nut certs on the centre cross members

30992186-0233-4406-9EFA-C41220F877A6.jpeg (188.65 KiB) Viewed 2515 times

6A2DC969-3ACA-4AD4-B3AB-C665E33978E6.jpeg (164.98 KiB) Viewed 2515 times

Also working on seat belt plates

BA5C8F33-29B1-4587-A8FE-A2D08EFFC56B.jpeg (195.9 KiB) Viewed 2515 times

Got them in the paint both, in front of the fire

4F7F37A9-6850-48E4-B9D1-BC1112563FBF.jpeg (151.67 KiB) Viewed 2515 times

EC595499-B0DA-4929-860E-C6A05E1E5EE4.jpeg (141.52 KiB) Viewed 2515 times

This rag top install sure dose make it easy to get into the front cab to work on thinks instead of crawling through the front windows

[splitthis]

Nice work mate. Removable belly pan is great for smuggling too, the kids will all want to borrow the mango for getting booze into festivals

[braddick]

Nice work mate. Removable belly pan is great for smuggling too, the kids will all want to borrow the mango for getting booze into festivals

Ha ha, been there done that only we were in a lowlight and poped the door cards apart to smuggle grog into falls festival. Rocked up in 35c heat with the windows up, I guess the inspectors thought we had A/C in the bus
The memory’s champ should never have sold that bus

[braddick]

I keep finding little welding jobs
Almost forgot the tabs for the long side on the floor

7342B106-9A60-420B-8533-C75F67981981.jpeg (183.27 KiB) Viewed 2477 times

[MID WEST DUBBER]

Belly pan looking good mate

[braddick]

Getting close to putting on some mango paint
Seam sealer going on
Not a fast or clean job but one that needs doing

5280547B-C2CF-4569-9FF9-21A47381127B.jpeg (169.82 KiB) Viewed 2440 times

[D-Train]

Fuckn awesome brad

[braddick]

Getting close now

0BCF8C09-F473-4FBD-BF08-64896815C683.jpeg (129.86 KiB) Viewed 2420 times

B3F8C9B0-41B9-43FC-8BD1-3A957BE426EE.jpeg (231.95 KiB) Viewed 2420 times

Made sure I tapped up my og paint heater log wouldn’t want any of that shiney paint on that bad boy

[Beatts]

I keep finding little welding jobs
Almost forgot the tabs for the long side on the floor 7342B106-9A60-420B-8533-C75F67981981.jpeg

Looking great Brad, can’t wait to see some mango getting sprayed around.

Mmmm don’t remember seeing tabs on the long side floor, might check that tomorrow.

[braddick]

So after a bit of a false start mid week when I thought I was ready to go only to realise that I forgot from my last spray painting job that the air regulator didn’t adjust down for lower pressure, which turned my shed into a blue light disco from the 90s with the smoke machine stuck on.
Plus it was bloody raining everyday
Come today and with the fire going it was just like mosses parting the Red Sea, I unscrewed the top of the wax and grease remover and out came the sun so I was able to push the doors open and let there be light and warm sunshine for that perfect baked oven job

4F1AC99F-D764-4FB5-B867-632F7A0698BC.jpeg (192.78 KiB) Viewed 2378 times

F9C27984-CBF0-4965-B48F-8A0DD93B6219.jpeg (184.48 KiB) Viewed 2378 times

437F0E2F-7AB5-4284-81CC-62DBBA077378.jpeg (205.17 KiB) Viewed 2378 times

B04FF2EE-3C1C-4AF6-A856-6F88B164E0DD.jpeg (244.13 KiB) Viewed 2378 times

B9FA68A4-B08D-4C29-873C-454C5D4048B8.jpeg (182.12 KiB) Viewed 2378 times

[MID WEST DUBBER]

Unreal Brad, looks so good!

[braddick]

Now prepping belly pan welding for tomorrow

D6948593-9151-4361-A764-8FA18F19E3AD.jpeg (208.58 KiB) Viewed 2366 times

[braddick]

Unreal Brad, looks so good!

Cheers rusty

[red hot bus]

Now that’s a milestone, looks great but I think you missed a spot