61DC project

Post pics and info of your rides here split windows only

Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb

Post Reply
User avatar
morts
DSKer
Posts: 2097
Joined: Sun Oct 29, 2006 9:22 pm
Location: McLaren Vale, South Australia

Re: 61DC project

Post by morts »

And how good is to have those 'as found' pics too.

Keen to see how you progress with it.
No matter what happens they can't take you out in the street and shoot you......
User avatar
warb
Mod
Posts: 7518
Joined: Mon May 16, 2005 5:15 pm
Location: Penrith, Nsw, Australia
Contact:

Re: 61DC project

Post by warb »

looks the goods, i thought prefect was a poofteenth off wide5?
also, dual taillights looks the goods with nipples, just me 2c,
nice one man.
User avatar
Kombiiknut
DSKer
Posts: 288
Joined: Thu Oct 06, 2022 7:35 pm

Re: 61DC project

Post by Kombiiknut »

vanell wrote: Thu Oct 27, 2022 10:48 am Another 61 with oval taillights, so here’s the dilemma, do you go with them or fit the twin taillights? I have the same on the 61DC I have but I recon I will switch it to twin taillights because I personally like them. Let the OG and personal preferences start
I'll bring going twins for sure
User avatar
Ted2
DSKer
Posts: 657
Joined: Fri Mar 07, 2008 4:24 pm
Location: Sunshine Coast QLD

Re: 61DC project

Post by Ted2 »

griffin wrote: Thu Oct 27, 2022 8:35 pm ooh nice work. re the tail lights I had head that dealers swapped the twin taillights for teh oval ones in 61/62 so buyers got the new version - dont know if true but a good story, though personally Id go the twin lights..
Spot on Gordon. There’s a VW technical bulletin showing how to update taillights to the “modern” oval taillights.
User avatar
Ted2
DSKer
Posts: 657
Joined: Fri Mar 07, 2008 4:24 pm
Location: Sunshine Coast QLD

Re: 61DC project

Post by Ted2 »

spl65t wrote: Thu Oct 27, 2022 7:14 pm Nice one, who’s going to have a guess in the first image….
What car is under the grey cover ?

A.


Linz
Gulf Blue, Turkis or White if we’re allowed multiple choice guesses 😂
vanell
DSKer
Posts: 1641
Joined: Sat Jul 15, 2006 3:58 pm

Re: 61DC project

Post by vanell »

spl65t wrote: Thu Oct 27, 2022 7:14 pm Nice one, who’s going to have a guess in the first image….
What car is under the grey cover ?

A.


Linz
I think it’s one of those rare Poraga’s
User avatar
Kombiiknut
DSKer
Posts: 288
Joined: Thu Oct 06, 2022 7:35 pm

Re: 61DC project

Post by Kombiiknut »

An update on progress of the DC, pulled a ton of bog out, put half a ton of lead in. Lined everything up. Fitted gates, engine lid and all bolt ons. And yes twin tail lights fitted (well i didn't but Martin Pomeroy did). Getting close to bringing it home for a shed paint job.
Attachments
Compress_20230120_102724_4565.jpg
Compress_20230120_102724_4565.jpg (11.64 KiB) Viewed 7166 times
Compress_20230120_102724_4475.jpg
Compress_20230120_102724_4475.jpg (11.13 KiB) Viewed 7166 times
Compress_20230120_102724_4416.jpg
Compress_20230120_102724_4416.jpg (9.83 KiB) Viewed 7166 times
Compress_20230120_102724_4317.jpg
Compress_20230120_102724_4317.jpg (9.34 KiB) Viewed 7166 times
User avatar
Kombiiknut
DSKer
Posts: 288
Joined: Thu Oct 06, 2022 7:35 pm

Re: 61DC project

Post by Kombiiknut »

Bit of an update, albeit it really doesn't look much different than before. A lot of bog removed and some lead inserted to bring the body back into much better long term condition. Rear lights all done to twin rounds, LHR vent back to the narrower correct version. Cab divider made and installed for fuel tank, rear seat base repaired. New lower floor etc..
Now time for a few underneath bits and paint..
Attachments
Compress_20230716_083718_8969.jpg
Compress_20230716_083718_8969.jpg (159.69 KiB) Viewed 6999 times
Compress_20230716_083719_9410.jpg
Compress_20230716_083719_9410.jpg (156.83 KiB) Viewed 6999 times
Compress_20230716_083719_9626.jpg
Compress_20230716_083719_9626.jpg (52.63 KiB) Viewed 6999 times
Compress_20230716_083719_9777.jpg
Compress_20230716_083719_9777.jpg (140.77 KiB) Viewed 6999 times
Compress_20230716_083718_8748.jpg
Compress_20230716_083718_8748.jpg (136.85 KiB) Viewed 6999 times
vanell
DSKer
Posts: 1641
Joined: Sat Jul 15, 2006 3:58 pm

Re: 61DC project

Post by vanell »

I like your cab divider, was thinking the same thing as that because of the fuel smell, especially when you fill up, Dual Cabs need the cabin sealed up from the tank area
User avatar
Kombiiknut
DSKer
Posts: 288
Joined: Thu Oct 06, 2022 7:35 pm

Re: 61DC project

Post by Kombiiknut »

vanell wrote: Sun Jul 16, 2023 10:11 am I like your cab divider, was thinking the same thing as that because of the fuel smell, especially when you fill up, Dual Cabs need the cabin sealed up from the tank area
Yep it will keep out all off the smells from the alloy fuel tank your going to whip me up wiz..👍👍
User avatar
morts
DSKer
Posts: 2097
Joined: Sun Oct 29, 2006 9:22 pm
Location: McLaren Vale, South Australia

Re: 61DC project

Post by morts »

That's looking really tidy, you must be happy with where it's at.

Not many doing lead wiping now either.
No matter what happens they can't take you out in the street and shoot you......
User avatar
Kombiiknut
DSKer
Posts: 288
Joined: Thu Oct 06, 2022 7:35 pm

Re: 61DC project

Post by Kombiiknut »

morts wrote: Mon Jul 17, 2023 8:58 pm That's looking really tidy, you must be happy with where it's at.

Not many doing lead wiping now either.
Yeah Morts, it nice heading into paint knowing that all the shitty bits have been taken care of, and you won't see rust again for a very long time..(or bog cracking for that matter, as the amount the last panel guy put in it just didn't make any sense, over the top of perfectly good metal)..
User avatar
Beatts
DSKer
Posts: 434
Joined: Wed May 30, 2018 11:23 pm
Location: Adelaide

Re: 61DC project

Post by Beatts »

Looks great Lochie, can’t wait to see this one when you’re done.
User avatar
067DUB
DSKer
Posts: 2895
Joined: Mon Oct 24, 2011 5:09 pm

Re: 61DC project

Post by 067DUB »

Looks great , tail lights are sweet
User avatar
Kombiiknut
DSKer
Posts: 288
Joined: Thu Oct 06, 2022 7:35 pm

Re: 61DC project

Post by Kombiiknut »

Well after a long wait in the shed while other projects needed completing, today I finally towed the DC up to the workshop to get in with it. Got all the suspension back out and started sitting o through all the bits an pieces I've gathered over the last few years in preparation. But if under body work to do, then hit it with the surface rust converter underneath and get some colour on. 👍
Post Reply