Ian’s Dual Cab

morts · Post by **morts** » Tue Dec 13, 2022 5:02 pm

You could turn that into a great single cab....

TomRat57 · Post by **TomRat57** » Tue Dec 13, 2022 6:17 pm

Ian, you are an absolute machine, considering I only dropped it off to you on Saturday (day before the cut up)
I’ll be following your thread with interest and am sure your ‘wizardry’ will work wonders with this DC project
Cheers Tom

Ted2 · Post by **Ted2** » Wed Dec 14, 2022 10:02 am

vanell wrote: ↑Tue Dec 13, 2022 8:05 am Just some oddball things on the DC, it’s definitely 61 going by the chassis number but,
The wiring loom is for a fuel gauge bus, and the dash wires for the gauge are original but it has a fuel tap cable in it , the fuel tank has the sender in it as well as a manual fuel tap
It has a grab handle on the dash
The taillights are oval, and look factory fitted
Maybe assembled in 62 with all the extras a 62 would have had

If original, what dates are on the speedo and fuel gauge Ian. My June 61 DC by chassis number had a fuel gauge dated 2/62, speedo dated 3/62, suggesting it was assembled many months later. Our DCs are 8 units apart by chassis number. Cheers

vanell · Post by **vanell** » Wed Dec 14, 2022 12:12 pm

Fuel gauge is 3/62
Speedo is 7/62

Ted2 · Post by **Ted2** » Wed Dec 14, 2022 1:01 pm

vanell wrote: ↑Wed Dec 14, 2022 12:12 pm Fuel gauge is 3/62
Speedo is 7/62

Your DC colour looks like it is Nimbus White too. 62 only colour.

vanell · Post by **vanell** » Wed Dec 14, 2022 1:09 pm

I don’t like the colour, currently I’m thinking Boronia Brown

Haha only kidding!

vanell · Post by **vanell** » Wed Dec 14, 2022 1:11 pm

I have to say I have never seen one of these
A throttle cable guide

: AA855194-F7B6-457C-A701-D075E532D5F8.jpeg (109.17 KiB) Viewed 4306 times

vanell · Post by **vanell** » Wed Dec 14, 2022 1:12 pm

I have Roughly got the back on the jig

: 08761EF8-4D9E-4653-8697-CD5B7BB99729.jpeg (127.92 KiB) Viewed 4306 times

braddick · Post by **braddick** » Wed Dec 14, 2022 8:47 pm

Not sure if I’ve asked this question to u Ian
Is this dc going to be shiny or og paint/ rat look
Just been admiring the nice patina in the front cab section there

vanell · Post by **vanell** » Thu Dec 15, 2022 10:00 am

That’s not patina mate, it’s rust
Won’t be too many panels left for OG paint
I’ll weld it all up first then think about the paint
Maybe be able to keep the inside paint

warb · Post by **warb** » Thu Dec 15, 2022 10:50 am

vanell wrote: ↑Thu Dec 15, 2022 10:00 am That’s not patina mate, it’s rust

to some...

plus its lighter than carbon fibre.. looking the goods man.

1958kafer · Post by **1958kafer** » Thu Dec 15, 2022 2:48 pm

vanell wrote: ↑Wed Dec 14, 2022 1:11 pm I have to say I have never seen one of these
A throttle cable guide AA855194-F7B6-457C-A701-D075E532D5F8.jpeg

The guide must be made of plastic! Everything else has rusted away!

red hot bus · Post by **red hot bus** » Fri Dec 16, 2022 8:58 pm

Feels like déjà vu, but think you might get yours done a little quicker

vanell · Post by **vanell** » Sat Dec 17, 2022 2:48 pm

Trial fit of floor, seems like the last 2 I have done, about 10 mm short, this time I left about 20 mm of the rear floor

: 89EBF912-BD50-4EFC-96A4-13165647AC1D.jpeg (110.64 KiB) Viewed 4214 times

vanell · Post by **vanell** » Sat Dec 17, 2022 2:50 pm

Seat pedestal is not that good, but it is a good template for making another

: 3BB6839D-A05B-4056-B68A-7B03A05C84CB.jpeg (116.37 KiB) Viewed 4214 times

Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab