pg/sg 55
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
Very slow on the front, even in corona times. Found some bits for it. Nothing special but pretty neat.
Reproduction fat base arms, original mirrors and another 6v horn that actually works!!
Still has the bracket and all! (Thanks stealthy!!)
We are now also been evicted due to highway construction shortly, so have to move everything out soon, so I thought it Would it be a good opportunity to put bits on the bus to save on carrying more stuff around than what I need. Got some secondhand tyres on the rims, and stuck the engine where it should be. Couple of fitament issues but hopefully these will iron out when the new engine mounts go in.
Tyres on rims
On the bus, looks good
Engine in...
Reproduction fat base arms, original mirrors and another 6v horn that actually works!!
Still has the bracket and all! (Thanks stealthy!!)
We are now also been evicted due to highway construction shortly, so have to move everything out soon, so I thought it Would it be a good opportunity to put bits on the bus to save on carrying more stuff around than what I need. Got some secondhand tyres on the rims, and stuck the engine where it should be. Couple of fitament issues but hopefully these will iron out when the new engine mounts go in.
Tyres on rims
On the bus, looks good
Engine in...
- Zimblewinder
- DSKer
- Posts: 1356
- Joined: Fri May 20, 2005 9:28 am
- Location: Geeeeeelong
Re: pg/sg 55
the bus looks fantastic. My favourite standard colours. Now fess up, which fluffy toys are yours and which are Mia's?
March 58 Euro 23.
April 59 Mango
Wanted:
59 crank handle (tick!)
cargo door outer handle 59
two perfect rear floor mats (pretty pretty please!!!)
April 59 Mango
Wanted:
59 crank handle (tick!)
cargo door outer handle 59
two perfect rear floor mats (pretty pretty please!!!)
- MID WEST DUBBER
- DSKer
- Posts: 1336
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: pg/sg 55
Looking great Dion
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
They get put in the front when I make driving noises, pretend friends!Zimblewinder wrote:the bus looks fantastic. My favourite standard colours. Now fess up, which fluffy toys are yours and which are Mia's?
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
Room with a view. Got the steering box/drag link/steering wheel on It to help with moving.. I must say I like the look of that!
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
It’s funny how things pan out, I bought a bunch of stuff from a guy and the majority was beetle stuff but in the bottom of a tin was a bunch of wing nuts and seat clamps.
Mixture of later clamps and WW ones.
Need a couple more of these still
Mixture of later clamps and WW ones.
Need a couple more of these still
- splitthis
- DSKer
- Posts: 1617
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
Re: pg/sg 55
If you want to offload the leftover bay clamps I’ll buy some mate. I think I sold the last of my aluminium seat plates but I’ll double check tomorrow.
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
Sweet, I need some middle seat clamps still without the knobs on them. I ended up with all rear seat clamps!splitthis wrote:If you want to offload the leftover bay clamps I’ll buy some mate. I think I sold the last of my aluminium seat plates but I’ll double check tomorrow.
-
- DSKer
- Posts: 396
- Joined: Wed May 06, 2009 9:31 pm
Re: pg/sg 55
Molasses is supposed to work well on things like those seat clamps among other things.
Chuck them in a bucket & leave them to soak.
Chuck them in a bucket & leave them to soak.
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
Couple small wins
Took off the doors finally
The bottoms need work, but not bad for old steel.
Was dreading this job due to them all been seized, removed “cover” panel, removed plates, heat an twist them out. Re install!
Only one more to go.
Took off the doors finally
The bottoms need work, but not bad for old steel.
Was dreading this job due to them all been seized, removed “cover” panel, removed plates, heat an twist them out. Re install!
Only one more to go.
-
- DSKer
- Posts: 1642
- Joined: Sat Jul 15, 2006 3:58 pm
Re: pg/sg 55
Good work Dion, I see your got a lot done in the last 3 years
I secretly think that there’s a trophy for the longest build going, a bit hard to beat Steve Keeley, or Zimblewinder, Big Dave and of course Matt must get mentioned
Have I missed anyone else?
Come on mate at least do something once a week, I would like to see it finished, I remember the engine runs, you have all the seats and most of the parts
Post something once a week mate, get some feedback and the motivation will come back
I secretly think that there’s a trophy for the longest build going, a bit hard to beat Steve Keeley, or Zimblewinder, Big Dave and of course Matt must get mentioned
Have I missed anyone else?
Come on mate at least do something once a week, I would like to see it finished, I remember the engine runs, you have all the seats and most of the parts
Post something once a week mate, get some feedback and the motivation will come back
- splitthis
- DSKer
- Posts: 1617
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
Re: pg/sg 55
Ssshhhh Dion. Wiz still hasn’t been let in on the LLRCOA (Life Long Resto Club of Australia). It’s an exclusive club and I’m just not sure he has the patience to be a member. Bus looks as rad as ever by the way.
- rusty 55
- DSKer
- Posts: 607
- Joined: Wed Nov 28, 2007 8:56 pm
- Location: Adelaide
Re: pg/sg 55
I’m just satisfied to be part of something
Bus is looking great and so many similarities to mine rust wise, it bizarre
Keep chipping away (just not too quickly )
Bus is looking great and so many similarities to mine rust wise, it bizarre
Keep chipping away (just not too quickly )
it’s got nuffin to do wiv yer “vor sprung Durch technic” ya know!
- Cheeseboard
- DSKer
- Posts: 344
- Joined: Fri Sep 10, 2021 6:01 pm
- Location: Victoria
Re: pg/sg 55
I heard that the only way into the LLRCOA is to demonstrate the need for replacement section rust repairs on previously done replacement panel rust repairs. Could be wrong, wouldn’t be the first time.
Ideas man
Minister for Finance
Scared of wife finding out what I’ve spent
Minister for Finance
Scared of wife finding out what I’ve spent
- D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: pg/sg 55
I hear all that! Settled into this place for another 12months so getting motivated again to get into it. Hard when we’ve moved twice in the past 3 years, hate unpacking it just to repackage it again. Kids are older so hopefully can get more time on it.
Need the government to sort out the budget and allocate money for car projects.. haha
Need the government to sort out the budget and allocate money for car projects.. haha