Ian’s Dual Cab

Cheeseboard · Post by **Cheeseboard** » Sun Jul 30, 2023 8:08 am

Love your work Ian. Despite it being the middle of winter you keep powering on with this project. 11 weeks to reVolks, are you going to be driving it there?

Inspirational.

vanell · Post by **vanell** » Sun Jul 30, 2023 9:18 am

It’s a long way off from finishing, it will be put aside now, still need to buy a front and bulkhead and look for a bit of donor roof.
Single Cab Ute back from sandblaster next week so I am back on that

vanell · Post by **vanell** » Sun Oct 29, 2023 7:13 pm

Small deviation from what I have already done, ended up buying a 61 Panel Van for the lower panels , bulkhead and chassis
Panel Van has a lot of rust in the top part of it and the sides where the reinforcement beams are, but great chassis and floors
So I will be taking the cab and back off from the old chassis and putting it on the Panel Van chassis

: IMG_8401.jpeg (138.15 KiB) Viewed 8199 times

Kombiiknut · Post by **Kombiiknut** » Mon Oct 30, 2023 9:12 am

You don't mess around Wiz, awesome

vanell · Post by **vanell** » Mon Oct 30, 2023 1:14 pm

I would of had the roof off today but it is blowing a gale here today

: IMG_8427.jpeg (151.73 KiB) Viewed 8182 times

: IMG_8433.jpeg (175.38 KiB) Viewed 8182 times

splitthis · Post by **splitthis** » Mon Oct 30, 2023 2:25 pm

That bulkhead is awesome.

Are you going to be able to save the panels above the cab doors? They look solid too.

vanell · Post by **vanell** » Mon Oct 30, 2023 3:19 pm

Yeah bulkhead is why I got it, and it’s got a good passenger side B pillar and toolbox area
both pieces above the doors are rusty as, roof skin is ok but everything attached to it is rusty. Everything below the roof for about 50mm is trash, yet the floor structure is great , sides were rusty where the braces are, definitely too much work to fix it, but perfect base for the Dual Cab

rusty 55 · Post by **rusty 55** » Mon Oct 30, 2023 9:19 pm

Looks like a milk float!
Nice one Wiz, good to keep 61 theme going too

vanell · Post by **vanell** » Tue Oct 31, 2023 2:12 pm

Roof off to new owner, and the left over bit is off to the sandblaster

: IMG_8436.jpeg (146.69 KiB) Viewed 8155 times

: IMG_8437.jpeg (182.21 KiB) Viewed 8155 times

Kombiiknut · Post by **Kombiiknut** » Tue Oct 31, 2023 6:15 pm

vanell wrote: ↑Tue Oct 31, 2023 2:12 pm Roof off to new owner, and the left over bit is off to the sandblaster IMG_8436.jpegIMG_8437.jpeg

Double roof SC, something I haven't seen..

spl65t · Post by **spl65t** » Wed Nov 01, 2023 2:23 pm

Mate that's some awesome work, time and patience to salvage all those parts to get them into circulation again for other projects.
Credit to you !!

Everytime i see a pic of your ute makes me think - geez i'd like that !!
Going to have to wear a set of blinkers me thinks....

Linz

vanell · Post by **vanell** » Wed Nov 01, 2023 4:15 pm

You know you should own it, work Ute, tax write off

morts · Post by **morts** » Fri Nov 03, 2023 5:19 pm

Kombiiknut wrote: ↑Tue Oct 31, 2023 6:15 pm
vanell wrote: ↑Tue Oct 31, 2023 2:12 pm Roof off to new owner, and the left over bit is off to the sandblaster IMG_8436.jpegIMG_8437.jpeg
Double roof SC, something I haven't seen..

Looks like a Malibu board strapped to the top.

vanell · Post by **vanell** » Tue Nov 21, 2023 6:59 am

Off with the cabin and rear section again

: IMG_8458.jpeg (128.01 KiB) Viewed 7867 times

: IMG_8459.jpeg (141.32 KiB) Viewed 7867 times

: IMG_8460.jpeg (171.27 KiB) Viewed 7867 times

vanell · Post by **vanell** » Tue Nov 21, 2023 7:06 am

Put cabin and rear section on a better floor and chassis

: IMG_8471.jpeg (129.42 KiB) Viewed 7868 times

: IMG_8486.jpeg (161.54 KiB) Viewed 7868 times

Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab

Re: Ian’s Dual Cab