Ian’s Dual Cab

[fly life]

Next level mate

[vanell]

All day doing the C Pillars and got the door to swing nice

IMG_8875.jpeg (144.52 KiB) Viewed 2649 times

[vanell]

See the extra support under the bed, Aussie Dual Cab don’t have them but I have seen them on the Samba in American Dual Cabs. It will add more support and will be covered in like this

IMG_8878.jpeg (150.99 KiB) Viewed 2648 times

[spl65t]

I don't want to put pressure on anyone, but you seem to be working like a man possessed !!!

Is it Valla - the goal that your fast approaching ??? For us mear mortal's - I'd say no ! But you well that's another question.

Great work and some good ideas you incorporate into your builds - it's the small details.
LInz

[vanell]

Yeah Valla it is, I’m going for it
Another big day of cutting and welding
Had the cabin 5 mm too high on the drivers side and now it’s all making sense and perfect level all the way round with the laser now
Panels test fit nice with no tension
And got the front door into a manageable gap

IMG_8891.jpeg (107.34 KiB) Viewed 2590 times

IMG_8890.jpeg (110.52 KiB) Viewed 2590 times

[warb]

epic, keen to catch up at valla, let me know if you need somewhere to park up..

[spl65t]

Oh Wow, with the goal now confirmed - this thread just went next level.
As someone who uses lasers quite regualry in my job, they do make the job so much easier.
I even rip mine out for my bus when i played around with the suspension to make sure it sat level - left to right etc... Then used the adjusters to dial it in.

Good stuff....no pressure from around Australia we're all rooting for ya

By this pace.... probably make the Sydney VW Nationals !!! ..... hmmm Shauno

[vanell]

Nationals are 16 weeks away, seems like a better challenge to me, Shaun and me can park next to each other

[griffiths_r]

Nationals are 16 weeks away, seems like a better challenge to me, Shaun and me can park next to each other

Seriously impressive either way!

[spl65t]

hmmmm

[morts]

You're a star....

[vanell]

Drivers side bed support made, and tacked the repair panel on, going to have a go at tig welding it, just got to turn it around so the welder is closer. Test fitted the seat support that I made last year, been worried that the floor was a bit crappy but you hardly see any of it

72889376930__98AF4315-6531-47EA-80EE-C7C3506EC78F.jpeg (82.39 KiB) Viewed 2215 times

IMG_8909.jpeg (146.13 KiB) Viewed 2215 times

[griffiths_r]

…going to have a go at tig welding it

Is there anything you can’t do?

[fly life]

Look”n good mate

[vanell]

Well if I could find the battery tray I would weld the side on

IMG_8914.jpeg (110.36 KiB) Viewed 2001 times