Looking good mate, almost done.
Be careful with that acid, it eats paint. I got a few drops on my epoxy and it etched. Maybe try CLR on the dash first and use the acid on proper rust.
55 microbus
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
splitthis
- DSKer
- Posts: 1616
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
-
vanell
- DSKer
- Posts: 1640
- Joined: Sat Jul 15, 2006 3:58 pm
Re: 55 microbus
Don’t listen to Matt, he got a few drops on fresh paint
This stuff works great on OFG paint, go nuts on that under dash tray and see for yourself, don’t let it dry , give it about 15 minutes each time, might need to do it 5 times,and wash off with warm water and dry it with a towel
This stuff works great on OFG paint, go nuts on that under dash tray and see for yourself, don’t let it dry , give it about 15 minutes each time, might need to do it 5 times,and wash off with warm water and dry it with a towel
-
splitthis
- DSKer
- Posts: 1616
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
Re: 55 microbus
No one listens to me until it’s too late! It clearly states on the bottle “avoid painted areas”. In Wiz we trust though, he has used it more than me.
WWWD?
What Would Wiz Do?
WWWD?
What Would Wiz Do?
-
rusty 55
- DSKer
- Posts: 607
- Joined: Wed Nov 28, 2007 8:56 pm
- Location: Adelaide
Re: 55 microbus
Cheers fellas
I will test it out to get to know it before I’d put it all over the dash!
Actually happy with the job CLR did on the dash.
I will use it on rusty stuff mainly but will be useful to get other stuff cleaned up too
I will test it out to get to know it before I’d put it all over the dash!
Actually happy with the job CLR did on the dash.
I will use it on rusty stuff mainly but will be useful to get other stuff cleaned up too
it’s got nuffin to do wiv yer “vor sprung Durch technic” ya know!
-
vanell
- DSKer
- Posts: 1640
- Joined: Sat Jul 15, 2006 3:58 pm
Re: 55 microbus
Take it back to Bunnings and get a refund, then go to the Girls section and get some CLR
The instructions are just somebody’s opinion
The instructions are just somebody’s opinion
-
splitthis
- DSKer
- Posts: 1616
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
-
Kombiiknut
- DSKer
- Posts: 288
- Joined: Thu Oct 06, 2022 7:35 pm
-
Cheeseboard
- DSKer
- Posts: 343
- Joined: Fri Sep 10, 2021 6:01 pm
- Location: Victoria
Re: 55 microbus
Don’t tell me things have stalled again Big Dave.
Post a pic even if it’s just the dog down the beach.
Post a pic even if it’s just the dog down the beach.
Ideas man
Minister for Finance
Scared of wife finding out what I’ve spent
Minister for Finance
Scared of wife finding out what I’ve spent
-
rusty 55
- DSKer
- Posts: 607
- Joined: Wed Nov 28, 2007 8:56 pm
- Location: Adelaide
Re: 55 microbus
No mate, been chipping away Too busy in the shed to spend time posting
it’s got nuffin to do wiv yer “vor sprung Durch technic” ya know!
-
rusty 55
- DSKer
- Posts: 607
- Joined: Wed Nov 28, 2007 8:56 pm
- Location: Adelaide
Re: 55 microbus
Yeah I’ve got a couple of things done since last update
Have been cleaning up lots of bits with the rust buster, great stuff cheers Wiz. Including the dash and cab floor.
Removed the drivers door and pulled the door top apart.
Removed the remnants of the front valance and have been trial fitting the new one and bottom of A posts.
Also been getting under the middle and started on the chassis rail rust
Have been cleaning up lots of bits with the rust buster, great stuff cheers Wiz. Including the dash and cab floor.
Removed the drivers door and pulled the door top apart.
Removed the remnants of the front valance and have been trial fitting the new one and bottom of A posts.
Also been getting under the middle and started on the chassis rail rust
- Attachments
-
- IMG_5770.jpeg (139.05 KiB) Viewed 3183 times
-
- IMG_5772.jpeg (138.53 KiB) Viewed 3183 times
-
- IMG_5771.jpeg (131.34 KiB) Viewed 3183 times
it’s got nuffin to do wiv yer “vor sprung Durch technic” ya know!
-
rusty 55
- DSKer
- Posts: 607
- Joined: Wed Nov 28, 2007 8:56 pm
- Location: Adelaide
Re: 55 microbus
Found my cab mat and gave it a wash too
- Attachments
-
- IMG_5775.jpeg (158.21 KiB) Viewed 3183 times
-
- IMG_5774.jpeg (179.75 KiB) Viewed 3183 times
-
- IMG_5773.jpeg (145.52 KiB) Viewed 3183 times
it’s got nuffin to do wiv yer “vor sprung Durch technic” ya know!
-
rusty 55
- DSKer
- Posts: 607
- Joined: Wed Nov 28, 2007 8:56 pm
- Location: Adelaide
Re: 55 microbus
Came up alright
- Attachments
-
- IMG_5777.jpeg (172.08 KiB) Viewed 3184 times
-
- IMG_5776.jpeg (173.61 KiB) Viewed 3184 times
it’s got nuffin to do wiv yer “vor sprung Durch technic” ya know!
-
1958kafer
- DSKer
- Posts: 257
- Joined: Sun Aug 16, 2015 10:35 am
Re: 55 microbus
No rust in the floor Dave? Looks clean!
-
MID WEST DUBBER
- DSKer
- Posts: 1336
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: 55 microbus
Great work Dave, cool to see some more progress
-
splitthis
- DSKer
- Posts: 1616
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact: