57 11 Window - Penny

[Perik57Splitty]

Trimming works happening in the background by Brad at Bus n Bug, will get Alan Smith to do the final fit of headliner, seats, etc

[Perik57Splitty]

And a few pretty cool parts arriving at Champs workshop thanks to his contacts in Germany…so stoked to have such awesome people helping me with this bus, really grateful for all the help and advice I’ve received from everyone so far as I’m sure I’ll need plenty more as it progresses!!

[Perik57Splitty]

Some great progress so far this week thanks to Anthony’s hard work!!

[Saxon bell]

I checked it out today....nose and rear decklid done too. You'll. be happy to see the progress for sure!

[Perik57Splitty]

Progress update…pics tell the story

[Perik57Splitty]

Discovered how fun it is to take over the dining room table and spend the day putting pop outs together!!

[Saxon bell]

such good progress...

[Gunther]

You’re a better man than me. Those seals had me fkd

[Perik57Splitty]

Roof now in epoxy…huge job with a few surprise holes in/around the gutters but Anthony is a machine!!!

[Kombiiknut]

Niiiiiiiice

[MID WEST DUBBER]

Yeah that’s looking good mate!

[Perik57Splitty]

Updates on the last few weeks...

Seats frames blasted, etch primed and powdercoated before dropping off to Allan Smith along with covers, padding, handles, etc - should have them back in the next week or so

IMG_9290.JPG (265.29 KiB) Viewed 755 times

IMG_9290.JPG (265.29 KiB) Viewed 755 times

George (Fresh Kustoms) finished off my front beam and shipped off to Champs for me

beam.jpg (87.35 KiB) Viewed 755 times

beam2.jpg (94.12 KiB) Viewed 755 times

dropped.jpg (93.18 KiB) Viewed 755 times

Brad (Bus n Bug) finished off headliner, cards etc...just waiting on some brackets and bits to complete a couple of kick panels for the rear seats and that completes the kit for Allan to fit for me!

rear cards.jpg (70.81 KiB) Viewed 755 times

cargocards.jpg (92.47 KiB) Viewed 755 times

[splitthis]

shit tonne of progress mate, keep the updates coming.

Just so you know, your bus wouldn’t have had seat clamps on the two inner legs of the middle seat. It should however have plates welded to the floor where the legs sit. I think there’s a couple of pics on my looooong slow build.

[Perik57Splitty]

Anthony continues to smash it out...

Engine bay all sorted - metalworks completed (ski ramps, supports, battery trays, etc)

engine bay.jpg (134.49 KiB) Viewed 755 times

Big thanks to Coop for helping me out with a donor heater tube Y Piece, needed a bit of extra love to get it in but I feel like nothing's too hard for Anthony to work out!

y piece.jpg (147.01 KiB) Viewed 755 times

Cargo Area finished off with some final metalworks and finishing touches before getting it all in epoxy

cargo.jpg (187.24 KiB) Viewed 755 times

cargoepoxy.jpg (139.9 KiB) Viewed 755 times

Cab Area didn't need much work at all thankfully, dash was pretty straight, few minor dents here and there but all sorted and in epoxy

cabprep.jpg (200.1 KiB) Viewed 755 times

cab epoxy.jpg (144.79 KiB) Viewed 755 times

Underside has had a heap of little mods done to it - reinforcement plates for seats to be bolted through the floor for added strength along with seatbelt mounts and captive nuts, a bunch of items to suit what Champs has planned, electric heater flap, creative engineering steering setup test fit, etc - Anthony plans to have this all prepped and in epoxy by the end of the weekend!

heater.jpg (115.06 KiB) Viewed 755 times

under.jpg (138.75 KiB) Viewed 755 times

steeringrack.jpg (155.07 KiB) Viewed 755 times

steering.jpg (180.19 KiB) Viewed 755 times

[Perik57Splitty]

Outside of Bus (except for Roof and Underside) is now all blocked and re-primed ready for wet sanding, seam sealing, final paint prep!! Getting close!!

blocked.jpg (641.05 KiB) Viewed 756 times