The 58- Finally with rego
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- Zimblewinder
- DSKer
- Posts: 1356
- Joined: Fri May 20, 2005 9:28 am
- Location: Geeeeeelong
just curious, are you going for a total respray?? Would you be interested in swapping for some other doors so I can go OG paint?? Let me know when you get around to paint. Looking great
Cheers
Dale
Cheers
Dale
March 58 Euro 23.
April 59 Mango
Wanted:
59 crank handle (tick!)
cargo door outer handle 59
two perfect rear floor mats (pretty pretty please!!!)
April 59 Mango
Wanted:
59 crank handle (tick!)
cargo door outer handle 59
two perfect rear floor mats (pretty pretty please!!!)
- nicko
- DSKer
- Posts: 763
- Joined: Tue May 17, 2005 9:18 pm
- Location: Blackhead-Australia
Doors
Hi Dale
I will be keeping the og paint for the moment and are going to try and blend some paint to match for the bits that need it. Down the track I may get it resprayed original colours but at this stage I dont know. Which doors are you after as I may know where some cargo ones are
Cheers Nicko
I will be keeping the og paint for the moment and are going to try and blend some paint to match for the bits that need it. Down the track I may get it resprayed original colours but at this stage I dont know. Which doors are you after as I may know where some cargo ones are
Cheers Nicko
58 Standard
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
- nicko
- DSKer
- Posts: 763
- Joined: Tue May 17, 2005 9:18 pm
- Location: Blackhead-Australia
Bumpers
Here are the bumpers that Quazi straightened for me. I had them sand blasted and have done them in POR15. Next I will Tie-coat them, hifill and paint. You can see from the photos just how straight Shane got them. His work is amazing. Check this out if you havnt seen the before shots. http://www.dsk.com.au/dsk/forum/viewtop ... ht=bumpers
All the bumpers need now is some hifill primer to smooth over and they are ready for paint.
All the bumpers need now is some hifill primer to smooth over and they are ready for paint.
- Attachments
-
- Bumpers4POR15.JPG (38 KiB) Viewed 4654 times
-
- Bumpers3POR15.JPG (39.96 KiB) Viewed 4654 times
-
- Bumpers2POR15.JPG (47.11 KiB) Viewed 4654 times
-
- Bumpers1POR15.JPG (44.89 KiB) Viewed 4654 times
58 Standard
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
- byronbus
- Admin
- Posts: 7840
- Joined: Mon May 16, 2005 10:45 pm
- Location: Byron Bay
- nicko
- DSKer
- Posts: 763
- Joined: Tue May 17, 2005 9:18 pm
- Location: Blackhead-Australia
Yeh- Havnt seen that one before have you!!!
No Bruce The 3rd bumper will be for sale once I have fitted the others to the bus. I just thought I would get the spare blasted as it was in bare metal.
Cheers Nicko
No Bruce The 3rd bumper will be for sale once I have fitted the others to the bus. I just thought I would get the spare blasted as it was in bare metal.
Cheers Nicko
58 Standard
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
- byronbus
- Admin
- Posts: 7840
- Joined: Mon May 16, 2005 10:45 pm
- Location: Byron Bay
- nicko
- DSKer
- Posts: 763
- Joined: Tue May 17, 2005 9:18 pm
- Location: Blackhead-Australia
Yes will able to bring to Old Bar but first I have to get my bus back and fit the other as it was pretty damaged (I am looking at using the bar that was really flattened) and I just want to be %100 certain there will be no surprises. As for price I am not sure yet- I will have to see what they are going for. Will let you know when the bus comes back
Cheers Nicko
Cheers Nicko
58 Standard
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
- nicko
- DSKer
- Posts: 763
- Joined: Tue May 17, 2005 9:18 pm
- Location: Blackhead-Australia
Its home
The bus was delivered today and now the work begins- for me anyway- Where do I start- Have heaps of things I want to do but which one is first
Cheers Nicko
Cheers Nicko
- Attachments
-
- The middle seat
- middle seat.JPG (59.12 KiB) Viewed 4571 times
-
- Delivery1.JPG (86.71 KiB) Viewed 4571 times
-
- Delivery.JPG (99.4 KiB) Viewed 4571 times
58 Standard
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
- nicko
- DSKer
- Posts: 763
- Joined: Tue May 17, 2005 9:18 pm
- Location: Blackhead-Australia
Finally regoed
Its taken a while and the rear axle seal has failed after 30kms after it was replaced.- farrkk. Any suggestion about what I should be looking for when I pull it down. The whole reduction box was done- new bearing, seals gaskets etc
Cheers
Nicko
Cheers
Nicko
- Attachments
-
- Regoed2.JPG (42.73 KiB) Viewed 4513 times
-
- Regoed1.JPG (58.64 KiB) Viewed 4513 times
-
- Regoed.JPG (58.01 KiB) Viewed 4513 times
58 Standard
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
- winerot
- The Chairman
- Posts: 3387
- Joined: Mon May 23, 2005 9:00 pm
- Location: mullaway/arrawarra
-
- DSKer
- Posts: 4516
- Joined: Mon May 16, 2005 12:56 am
- Contact:
- warb
- Mod
- Posts: 7518
- Joined: Mon May 16, 2005 5:15 pm
- Location: Penrith, Nsw, Australia
- Contact:
- kombiing
- DSKer
- Posts: 465
- Joined: Sun May 29, 2005 10:14 pm
- Location: Lower Hunter
- nicko
- DSKer
- Posts: 763
- Joined: Tue May 17, 2005 9:18 pm
- Location: Blackhead-Australia
Yes Wally I am stoked- I just want to drive it. Thanks for the comments- I looked at page one and while it still looks ruff it doesnt have big holes in it.
I put the gaskets in but I did have to pull the cover plate off as I had to do something with the brake backing plate so that might be the problem. The oil is coming out pretty quick though.
I never have been in a car with a split case transmission before and are surprised how noisey first and reverse are. I will have to make a video of it and post it here so I can find out if it is excessive
Cheers
Nicko
I put the gaskets in but I did have to pull the cover plate off as I had to do something with the brake backing plate so that might be the problem. The oil is coming out pretty quick though.
I never have been in a car with a split case transmission before and are surprised how noisey first and reverse are. I will have to make a video of it and post it here so I can find out if it is excessive
Cheers
Nicko
58 Standard
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
Wanted:
Caramel Front seat for 58 to 60 model. Not the hump style one. Any caramel interior stuff will be of interest
- hjsimpson01
- DSKer
- Posts: 160
- Joined: Thu Sep 25, 2008 1:16 pm
- Location: North Tasmania
- Contact:
It'd be good to know about this a bit more, mine is going down same path once up and running, all original, reductions hubs, etc... Keep us informed (Like I need to say that!)
Where there's a Will there's a Kombi....
<b>KERMIT</b> - 1957 PG/SG Microbus
<b>PAT</b> - 1964 PMG Panel
<b>GOGH</b> - 1965 PW Kombi
<b>KERMIT</b> - 1957 PG/SG Microbus
<b>PAT</b> - 1964 PMG Panel
<b>GOGH</b> - 1965 PW Kombi