Dozzas 67 project panel

Post pics and info of your rides here split windows only

Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb

User avatar
crewcabconnection
Mod
Posts: 2479
Joined: Sun May 29, 2005 9:43 pm
Location: Penriff - Sydney - NSW Australia
Contact:

Post by crewcabconnection »

and rub it with 3M 36 on the filler to get the shape first, fill, rub high spot, fill rub, 2/3 runs at it will fix it - come an see the hole in my roof, knock off the build on the paper with a wire brush, before you attempt to get it too straight or smooth....made that mistake for a few nights...the 36 is a winner, and don't leave the filler to go rock hard, get it before, it's easier to shape....and as I've deiscovered, it's more like clay modelling and art than it is an exact process. So get artistic....hands are a good tool.
Cognitive Dissonance - The only way to grind.
User avatar
Dozza
DSKer
Posts: 159
Joined: Wed Aug 31, 2005 7:02 am

Post by Dozza »

I am begining to think I should change the title of this thread...... :?
User avatar
Dozza
DSKer
Posts: 159
Joined: Wed Aug 31, 2005 7:02 am

Post by Dozza »

One down - one to go......
Attachments
cargo 3.jpg
cargo 3.jpg (50.27 KiB) Viewed 1558 times
User avatar
crewcabconnection
Mod
Posts: 2479
Joined: Sun May 29, 2005 9:43 pm
Location: Penriff - Sydney - NSW Australia
Contact:

Post by crewcabconnection »

noice work Dozza...as a fellow rubber and primer of late, I can appreciate the pride...how did you get to bring it inside the house but///
Cognitive Dissonance - The only way to grind.
User avatar
Tonz Magonz
Mod
Posts: 4085
Joined: Tue May 17, 2005 9:13 pm
Location: Melbourne mostly

Post by Tonz Magonz »

The good lady must have in bed or gone shoppin!! :roll:
Wanted..Barny bits or 60's Supercharger other than Judson
Image
User avatar
Dozza
DSKer
Posts: 159
Joined: Wed Aug 31, 2005 7:02 am

Post by Dozza »

the other half doesnt know its in the house..... she doesnt go downstairs much - there is plenty of room... you should see how much kombi stuff is down there. :wink:

She is pretty used to seeing Kombi bits everywhere now, with four on our drive in the garage.....

Nearly finished all the doors and hatches.... starting to think about colour should be ready to paint in about two weeks. Anyone got any ideas?? I am not sure whether to two tone her or do it in some sort of commercial/industrial colour all over. Plan is to lower her and IRS eventually.

I could post a thread letting anyone who is intersted vote on a colour and then paint it whichever colour gets most votes.... now there is an idea :D :D :D
User avatar
Dozza
DSKer
Posts: 159
Joined: Wed Aug 31, 2005 7:02 am

Post by Dozza »

Getting stuck into the cargo floor... I have cut a floor donor section out of a Bay window - fits perfectly....
Attachments
floor.jpg
floor.jpg (91.75 KiB) Viewed 3368 times
User avatar
Dozza
DSKer
Posts: 159
Joined: Wed Aug 31, 2005 7:02 am

Post by Dozza »

Well I have been so busy restoring various kombis that I have not had a chance to put any progress photos up....

I am nearly there now...

Will post some photos soon
D O Z Z A :D
User avatar
Dozza
DSKer
Posts: 159
Joined: Wed Aug 31, 2005 7:02 am

Post by Dozza »

got loads of photos to put up. Panel is getting painted next week... at last..... yahooooooo...


Still not 100% but think I am painting it in a slightly contraversial two tone scenario with a stone grey up top and a light grey or similar below... but not sure - any ones thoughts??

As a rule I dont really like some of the two tone split panels I have seen, but they all seem to be white up top and therefore looking far to pretty and like they are trying to be a window van. I am hoping the darker grey on the top will give it a slighlty edgy look - am I mad - should I stick to something original - its going to be low, with standard wheels for moment....

btw - anyone know how to convert photos into smaller sizes so I can put them up?? I did have a program that did it but no longer.....

Cheers


D O Z Z A
User avatar
daveo
DSKer
Posts: 1294
Joined: Sun Sep 04, 2005 9:47 am
Location: Turners Beach Tassie
Contact:

Post by daveo »

Not a pannel but......love the coluors. Good luck Dude!
By the amount of work youve done ...any colour would look great.
Sweet ! 8)
Attachments
275463.jpg
275463.jpg (67.31 KiB) Viewed 3297 times
User avatar
beerdoc
DSKer
Posts: 1270
Joined: Mon May 23, 2005 7:11 pm
Location: Geelong Vic

Post by beerdoc »

I am with Davo on the colours

You have a pm
Cheers Doc

reVOLKS at Geelong
11th /13th Oct 2013

Image
frenzix
DSKer
Posts: 4516
Joined: Mon May 16, 2005 12:56 am
Contact:

Post by frenzix »

sweet work, anyone that turns a swiss cheese panel back to normal is good.
lobus
DSKer
Posts: 1780
Joined: Tue Jun 28, 2005 6:22 pm
Location: Frankston Victoria

Post by lobus »

Great work, I like your thinking on making it look llike a panel, as distinct from a window van. I think the choice of colour is one of the hardest and most nerve wracking things to do in a resto. I also think if you have done the prep well it will look the goods no matter what your choice. Have you had a play on the Bus selecta site? It is a bit cartoonish but is as close as I can get without actual painting.


http://www.busselecta.com/bus/


As for reducung your pics, if you are usung windows XP save the pics in original size then highligt them in the folder and right click and select the "resize pictures option"
If you can't do that email them to me and I will reduce them for you, post em up and send em back to you.
send em to....
dubnut54@yahoo.com

Disclaimer..The above is the total of my IT expertise and knowledge.
David
lobus
DSKer
Posts: 1780
Joined: Tue Jun 28, 2005 6:22 pm
Location: Frankston Victoria

Post by lobus »

Is this what you have in mind? I took abit of artistic license and blinged it up a bit, simply because I could.
Image
jhp1
DSKer
Posts: 714
Joined: Tue Mar 28, 2006 11:42 am
Location: Bendigo
Contact:

Post by jhp1 »

Hey lobus love that bus selecta site spend hours on there
Getting married?

www.volksweddings.com.au
Post Reply