Hahndorf to Cummins 650kms
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- jamesminhard
- DSKer
- Posts: 180
- Joined: Fri Aug 26, 2005 10:47 pm
- Location: Cummins S.Aus Eyre Peninsula
- Contact:
Hahndorf to Cummins 650kms
Some will be aware that the DD panel has gone but to fill the space in the shed is 55 single cab, beatifully rust repaired and colour matched by pmg bus. Also completely over hauled.
Last thursday it was time to drive the young fella back, iv posted just a couple pics of the trip, il take a couple of it now its home.
As far as the trip went, it was "relatively" "trouble free" we busted a fan belt but limped a few kms to Lower Light and replaced it, then about 25 kms from home the gear shift coupling slipped off. but i managed to select 3rd to limp home. 650 kms in aprox 9 hours. The trip was enjoyed by both Spider and Red dog. Along the way we recived plenty of waves and were over taken a number of times with people pulling up a few kms ahead to take photos.
Huge thanks to Andrew for making it happen
Last thursday it was time to drive the young fella back, iv posted just a couple pics of the trip, il take a couple of it now its home.
As far as the trip went, it was "relatively" "trouble free" we busted a fan belt but limped a few kms to Lower Light and replaced it, then about 25 kms from home the gear shift coupling slipped off. but i managed to select 3rd to limp home. 650 kms in aprox 9 hours. The trip was enjoyed by both Spider and Red dog. Along the way we recived plenty of waves and were over taken a number of times with people pulling up a few kms ahead to take photos.
Huge thanks to Andrew for making it happen
- Attachments
-
- tn_IMGP0831.JPG (48.99 KiB) Viewed 6966 times
-
- tn_IMGP0833.JPG (67.62 KiB) Viewed 6966 times
-
- tn_IMGP0837.JPG (55.33 KiB) Viewed 6966 times
-
- tn_IMGP0838.JPG (50.62 KiB) Viewed 6966 times
-
- tn_IMGP0832.JPG (53.1 KiB) Viewed 6966 times
Spider
- jamesminhard
- DSKer
- Posts: 180
- Joined: Fri Aug 26, 2005 10:47 pm
- Location: Cummins S.Aus Eyre Peninsula
- Contact:
Specs
Narroed Ball joint beam with adjusters and drop spindles - disc brake front, 1600 tp with straight axle kit. factory safaris and factory hoops and bows. We are currently on the hunt for a rear bumber and rear roof card
Spider
- warb
- Mod
- Posts: 7518
- Joined: Mon May 16, 2005 5:15 pm
- Location: Penrith, Nsw, Australia
- Contact:
- Kombi Trip
- DSKer
- Posts: 1493
- Joined: Thu Dec 29, 2005 5:20 pm
- Location: Far North QLD
- Contact:
-
- DSKer
- Posts: 13
- Joined: Sun Feb 25, 2007 7:16 pm
- Location: Bungendore, NSW
-
- DSKer
- Posts: 4516
- Joined: Mon May 16, 2005 12:56 am
- Contact:
- byronbus
- Admin
- Posts: 7840
- Joined: Mon May 16, 2005 10:45 pm
- Location: Byron Bay
- jamesminhard
- DSKer
- Posts: 180
- Joined: Fri Aug 26, 2005 10:47 pm
- Location: Cummins S.Aus Eyre Peninsula
- Contact:
home
couple more
- Attachments
-
- tn_IMGP0928.JPG (70.02 KiB) Viewed 6922 times
-
- tn_IMGP0923.JPG (67.03 KiB) Viewed 6922 times
-
- tn_IMGP0922.JPG (69.32 KiB) Viewed 6922 times
Spider
- morts
- DSKer
- Posts: 2097
- Joined: Sun Oct 29, 2006 9:22 pm
- Location: McLaren Vale, South Australia
- jamesminhard
- DSKer
- Posts: 180
- Joined: Fri Aug 26, 2005 10:47 pm
- Location: Cummins S.Aus Eyre Peninsula
- Contact:
morts
i know the buses morts, a fella is moving all his estate over here including two splits, adelaide fella.. very eciting to see nothr split close by. when are you coming to see spider ,morts?
Spider
- tombi (aka type2tommy)
- DSKer
- Posts: 872
- Joined: Tue Mar 14, 2006 10:44 am
- Location: In da hood
- byronbus
- Admin
- Posts: 7840
- Joined: Mon May 16, 2005 10:45 pm
- Location: Byron Bay
- jamesminhard
- DSKer
- Posts: 180
- Joined: Fri Aug 26, 2005 10:47 pm
- Location: Cummins S.Aus Eyre Peninsula
- Contact:
spindles
the beam and spindles were done by mike kirsten at custom bugs and busses in Penrith about 5 years ago. I supplied 2 sets of bal joint spindles, one 68 and one about 73. from memory they cost $770 i think they have increased in price. they are however probly the best way to go. a very good ride and it stops good with discs
Spider
-
- DSKer
- Posts: 73
- Joined: Fri Feb 18, 2011 9:12 pm
- SplitPersonality
- DSKer
- Posts: 657
- Joined: Sun Apr 15, 2007 11:04 am
- Location: Left at the round-a-bout and up the hill