Our 62 Microbus project

frenzix · Post by **frenzix** » Sat Aug 16, 2008 12:55 pm

Hi Steve, yep there it is hollow and dips down to the b piller, unsure if it goes "inside" of the B pillar from original as this B piller at the bottom is non existant

frenzix · Post by **frenzix** » Sun Aug 17, 2008 5:28 pm

I did some more work today, really trying to knock over this side as it's the worst section by far

byronbus · Post by **byronbus** » Sun Aug 17, 2008 6:24 pm

Nice work timmy

frenzix · Post by **frenzix** » Sun Aug 17, 2008 6:54 pm

Thanks honey, its only tack welded, i will go through and weld up properly went it's all in place, outriggers/jacpoints/sill/inner sill and other bits..

Volksaddict · Post by **Volksaddict** » Sun Aug 17, 2008 9:05 pm

good stuff migman..keep the pics coming

Shaven · Post by **Shaven** » Thu Aug 21, 2008 10:27 pm

finish the DC

frenzix · Post by **frenzix** » Sun Aug 31, 2008 2:33 pm

getting there

frenzix · Post by **frenzix** » Mon Sep 01, 2008 7:15 pm

matara · Post by **matara** » Mon Sep 01, 2008 9:06 pm

Tim, looking good. Hey how hard were the doglegs to fit?

Cheers

Steve

kombi1976 · Post by **kombi1976** » Mon Sep 01, 2008 11:29 pm

Is the lower half of that bus a minty green colour or just dirty white?

Shaven · Post by **Shaven** » Tue Sep 02, 2008 6:21 am

nice work timothy...

frenzix · Post by **frenzix** » Tue Sep 02, 2008 6:54 am

hehe thanks, the dogleg needed a little bashing and grinding.. but was generally alright.. the only original bit to weld to mind you was the top metal under the seat. The lower half is Beryl Green .. it looks nicer in real life.

frenzix · Post by **frenzix** » Fri Sep 05, 2008 9:26 pm

other side..

brad@busnbug · Post by **brad@busnbug** » Sat Sep 06, 2008 9:56 pm

You're giving it a serious thrashing there Timmy. Well done.

kroozzn62 · Post by **kroozzn62** » Sun Sep 07, 2008 3:29 pm

mate looking good,