'55 11-Window"Sheep Carrier"....a bit of a rethink

Post pics and info of your rides here split windows only

Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb

Post Reply
User avatar
kombi1976
DSKer
Posts: 3744
Joined: Thu Jan 25, 2007 2:59 pm
Location: Southern Tablelands

Post by kombi1976 »

1963 Empi Radar wrote:
kombi1976 wrote:
Now all I need to do is decide where to start...... :|
Sell the Cb's :P
It's funny you should say that.
[Cue: Dutchy enters stage right] :wink:
Cheers & God Bless

'62 Beetle
'62 Panel project
'67 Panel
User avatar
kombi1976
DSKer
Posts: 3744
Joined: Thu Jan 25, 2007 2:59 pm
Location: Southern Tablelands

Post by kombi1976 »

morts wrote:Think your young'n has got his eye on this one.........
Ya reckon?
What I didn't post was the pic of his little brother crying consolably because I'd made him get out of the '55, there being little bits of glass all over the place.
He didn't just have his eye on it, he had his arse in it! :(
Cheers & God Bless

'62 Beetle
'62 Panel project
'67 Panel
User avatar
slowlearner
DSKer
Posts: 23
Joined: Mon Aug 18, 2008 7:29 pm
Location: never never you mind
Contact:

Post by slowlearner »

i'll be coming down for an inspection next week if that's ok with you.


i have to say it looks awful though :cry:
coz stupid is stronger than axles...
User avatar
kombi1976
DSKer
Posts: 3744
Joined: Thu Jan 25, 2007 2:59 pm
Location: Southern Tablelands

Post by kombi1976 »

Anytime, mate, although you may want to check with the missus when it's convenient.
And if you're thinking it doesn't look great I'm not going to argue with you.
Mind you, things are looking up. :wink:
Cheers & God Bless

'62 Beetle
'62 Panel project
'67 Panel
User avatar
Dutchy
DSKer
Posts: 1801
Joined: Wed Jul 25, 2007 2:59 pm
Location: Dural 2158

Post by Dutchy »

first job done, installed the fuel filler cap.... :wink:
Attachments
Image379.jpg
Image379.jpg (43.22 KiB) Viewed 2693 times
User avatar
Tonz Magonz
Mod
Posts: 4085
Joined: Tue May 17, 2005 9:13 pm
Location: Melbourne mostly

Post by Tonz Magonz »

Dutchy wrote:first job done, installed the fuel filler cap.... :wink:
You have the wrong type....
Thats a Golf one.. :lol:
Apologies to the younger viewers for that " Dad" joke..
Wanted..Barny bits or 60's Supercharger other than Judson
Image
User avatar
slowlearner
DSKer
Posts: 23
Joined: Mon Aug 18, 2008 7:29 pm
Location: never never you mind
Contact:

Post by slowlearner »

kombi1976 wrote:Anytime, mate, although you may want to check with the missus when it's convenient.
And if you're thinking it doesn't look great I'm not going to argue with you.
Mind you, things are looking up. :wink:
yeah I'll give your missus a call.

btw, what's looking up? the size of the rust repair bill? :roll:

Tonz, you need help [and I am jealous I didn't get to that joke first] :lol:
coz stupid is stronger than axles...
User avatar
D-Train
DSKer
Posts: 3510
Joined: Mon Nov 28, 2005 3:03 pm
Location: coffs harbour

Post by D-Train »

Tonz Magonz wrote:
Dutchy wrote:first job done, installed the fuel filler cap.... :wink:
You have the wrong type....
Thats a Golf one.. :lol:
Apologies to the younger viewers for that " Dad" joke..
tonz, want some wine with that cheese?
User avatar
Tonz Magonz
Mod
Posts: 4085
Joined: Tue May 17, 2005 9:13 pm
Location: Melbourne mostly

Post by Tonz Magonz »

No wine,
But some flutes would be nice for the "Champagne" comedy ... :lol: :shock:
Wanted..Barny bits or 60's Supercharger other than Judson
Image
User avatar
kombi1976
DSKer
Posts: 3744
Joined: Thu Jan 25, 2007 2:59 pm
Location: Southern Tablelands

Post by kombi1976 »

Is that right after your "champagne" lawn bowls? :D
Cheers & God Bless

'62 Beetle
'62 Panel project
'67 Panel
User avatar
kombi1976
DSKer
Posts: 3744
Joined: Thu Jan 25, 2007 2:59 pm
Location: Southern Tablelands

Taking off that bloody house paint!

Post by kombi1976 »

Today I began the long task of removing the rotten house paint that is strewn all over this poor vehicle.
Rust is one thing but the paint is another.
Some people reckons it saves metal......well, not in this bus, mate!
On the recommendation of some mates I tried Citristrip.
My missus has used this stuff before and it's very effective but I played it safe and tried it in an innocuous spot first....the inside of the fuel filler cover.
Here's the before pic:
Image

And after a liberal supply of Citristrip and 25 minutes or so:
Image

These results were encouraging so I decided to go for broke on the upper back RHS corner of the bus.
Before:
Image

And after:
Image

There were some scary moments.
As I was scraping off the paint around the belt line I noticed some red paint here coming through UNDER the blue:
Image

To begin with I though it was a factory undercoat and I'd buggered it up.
But on closer examination there is ANOTHER layer of blue below the red.
Clearly at some point in it's life it was resprayed over the factory paint with a similar if not identical colour.
Most of the way around there's nothing between but here there's red between the layers.
What it does mean is I'll have to carefully sand the last of the 2nd layer of blue with very fine sandpaper, perhaps steel wool, to get to the bottom layer before polishing.
But yeah, it's a good sign.
I'm a school teacher and have the next week and a half off so it's goal for my hols to get all that paint off the outside, if not the inside.
The main thing is not to rush.
It's preservation not eradication afterall.
Cheers & God Bless

'62 Beetle
'62 Panel project
'67 Panel
User avatar
splitbus
DSKer
Posts: 3233
Joined: Sun Dec 09, 2007 7:47 am
Location: Brisbane Northside

Post by splitbus »

Nice work, should come up good 8) and extra blue paint for a safty net


Patience, patience O little one, try and take the pebbles from my hand
Mike |o\*/o| 55 11 Window

I don't have a bucket list I have a fu#kit list a mile long
User avatar
Dutchy
DSKer
Posts: 1801
Joined: Wed Jul 25, 2007 2:59 pm
Location: Dural 2158

Post by Dutchy »

looks good under there, youve got more patience than i do. I started to do this with my 11 to try to reveal the 'mango cremy colour' but got too enthusiastic and went back to bare metal all round. dont do what i did, it will be worth it in the end.
User avatar
warb
Mod
Posts: 7518
Joined: Mon May 16, 2005 5:15 pm
Location: Penrith, Nsw, Australia
Contact:

Post by warb »

looking good mate, get that blue to the surface!.
User avatar
matara
Admin
Posts: 1472
Joined: Wed May 18, 2005 11:34 pm
Location: Wahroonga, Sydney
Contact:

Post by matara »

That looks very encouraging Andy. Slow and steady, I'm sure this is going to turn into a pearler. The in-laws will be eating their words soon!

Cheers

Steve
Post Reply