62 panel
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- FrankenCab
- DSKer
- Posts: 3528
- Joined: Wed Apr 18, 2007 8:55 pm
this ones for ozjeff , greens temp on so piss off . got lights sorted with H4's modded to fit used CB inners with old proper split lenses , they have the vw emblem on the glass not hella or bosch with the side fluting running vertical. Anyone know what year these came from can get pics if you like.
- Attachments
-
- IMG_0711.JPG (49.6 KiB) Viewed 2399 times
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
- FrankenCab
- DSKer
- Posts: 3528
- Joined: Wed Apr 18, 2007 8:55 pm
- kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
- FrankenCab
- DSKer
- Posts: 3528
- Joined: Wed Apr 18, 2007 8:55 pm
- Tonz Magonz
- Mod
- Posts: 4085
- Joined: Tue May 17, 2005 9:13 pm
- Location: Melbourne mostly
FnC...
Loving the progress pics but have to ask why you don't replace the whole nose panel considering the damage to the raised section ?...Looks nasty in the pics.. ( but I dont have the beating skills you possess...)
Keep up the good work..
Cheers Tonz
Loving the progress pics but have to ask why you don't replace the whole nose panel considering the damage to the raised section ?...Looks nasty in the pics.. ( but I dont have the beating skills you possess...)
Keep up the good work..
Cheers Tonz
Wanted..Barny bits or 60's Supercharger other than Judson
- FrankenCab
- DSKer
- Posts: 3528
- Joined: Wed Apr 18, 2007 8:55 pm
yeah thought about it but this bus became more of a resurection than a resto, its been hammered hard in the back p/side and front and i wanted it to show whats its been thru and drive the shit out of it and use and abuse it. i should have it at the nats , just dont use a tape measure to check the gaps.
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
- Tonz Magonz
- Mod
- Posts: 4085
- Joined: Tue May 17, 2005 9:13 pm
- Location: Melbourne mostly
- Shaven
- DSKer
- Posts: 7420
- Joined: Tue Sep 19, 2006 4:17 pm
- Tonz Magonz
- Mod
- Posts: 4085
- Joined: Tue May 17, 2005 9:13 pm
- Location: Melbourne mostly
- FrankenCab
- DSKer
- Posts: 3528
- Joined: Wed Apr 18, 2007 8:55 pm
- FrankenCab
- DSKer
- Posts: 3528
- Joined: Wed Apr 18, 2007 8:55 pm
front on just a little bit more welding , had to cut n shut nose section and did a bit of slide hammering and came up pretty good considering.
Might leave it green for rego and just etch prime bare metal.
Might leave it green for rego and just etch prime bare metal.
- Attachments
-
- IMG_0716.JPG (52.15 KiB) Viewed 2239 times
-
- IMG_0715.JPG (55.07 KiB) Viewed 2239 times