62 panel

Post pics and info of your rides here split windows only

Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb

Post Reply
dubdan04
Newly Converted
Posts: 6
Joined: Wed Mar 18, 2009 4:06 pm

Post by dubdan04 »

good work klaus, congrats on getting it finished/ regg'ed! looking forward to seeing the finished product in the flesh!
Bring on the next basketcase ...moss monster ( lowlight sc first)
good to see u havnt forgotten about the ute! :)
User avatar
kombiing
DSKer
Posts: 465
Joined: Sun May 29, 2005 10:14 pm
Location: Lower Hunter

Post by kombiing »

Hey Klaus good work, got the micro registered today BB.71.EV was about 2.30pm no pics cause it's a fat chick look forward to seeing the panel at the nats see you there
User avatar
FrankenCab
DSKer
Posts: 3528
Joined: Wed Apr 18, 2007 8:55 pm

Post by FrankenCab »

never forget the ute , looking forward to getting it ready too cool to have sitting in the yard .
Already been looking at rust repair sections for gf panel .
wheel bearings done engine out , seal changed and genny changed over bad bearing made it feel like engine was solid mounted , might be able to get fuel sender earthed out too and exhaust leaks welded up.
i like fatty's ha so many ways that can be taken ... aww thats what she said. better stop too tired . If the one i rebuilt for travellinbob didnt burn to the ground I'd be driving that around, yeah should be good to catch up on sunday, the samba coming?
User avatar
kombiing
DSKer
Posts: 465
Joined: Sun May 29, 2005 10:14 pm
Location: Lower Hunter

Post by kombiing »

Yeah the fat chicks are a beautiful thing to drive already irs'd disk braked etc just don't look as good as the slimmer older girls, no samba in another territory now! see you there
User avatar
kombi1976
DSKer
Posts: 3744
Joined: Thu Jan 25, 2007 2:59 pm
Location: Southern Tablelands

Post by kombi1976 »

As I said at the show, Klaus, that Panel looks damn sexy.
I love the wide-5s on the back and I'd keep the red oxide on those rear panels.
It looks hot.
Top work all over.
Cheers & God Bless

'62 Beetle
'62 Panel project
'67 Panel
travellinbob
DSKer
Posts: 220
Joined: Mon Apr 23, 2007 4:43 am

Post by travellinbob »

bring on the next one!!!!!! have you started yet?? :lol:
User avatar
FrankenCab
DSKer
Posts: 3528
Joined: Wed Apr 18, 2007 8:55 pm

Post by FrankenCab »

drove it for work today and had a clogged fuel filter on the freeway at peek hour , all good . , pretty happy how it came out will finish fixing doglegs and give them a spray then work on doing some sign writing and ageing it a bit , back will stay red for a bit may have to spray roof for work reasons so it looks clean but old. (rub thru to primer) And sort out front beam might steal narrowed one out of dc and also drop spindles that should be here soon . mmm might get some sprintstars. thanks for comments , and wayne penrose for getting me a blueslip inspection done with such short notice and for passing it even though its all mech sweet ,
yeah i says as jeff and brenden gave me a hand to change engines 3 times on sat before nats , I now owe you jeff as your old 1500 runs sweet but you had a drive so I think were even ha .
User avatar
beerdoc
DSKer
Posts: 1270
Joined: Mon May 23, 2005 7:11 pm
Location: Geelong Vic

Post by beerdoc »

Thanks Klaus for the cuz out on Sunday

Great work on that bus mate I was telling Kaye how there was no rear 6 months ago

Image

Image
Cheers Doc

reVOLKS at Geelong
11th /13th Oct 2013

Image
User avatar
FrankenCab
DSKer
Posts: 3528
Joined: Wed Apr 18, 2007 8:55 pm

Post by FrankenCab »

dig your bus , gotta check your build again to see whats powering it, already checking out a larger cc engine and interior, a little bit noisy.
found out that it leaks a bit out back gotta finish welding roof so i cant see daylight thru it.
User avatar
FrankenCab
DSKer
Posts: 3528
Joined: Wed Apr 18, 2007 8:55 pm

Post by FrankenCab »

beam out and a 4 inch narrowed beam out of dc in, going to put beam into lowlight sc .
Attachments
IMG_0753.JPG
IMG_0753.JPG (38.36 KiB) Viewed 3663 times
IMG_0751.JPG
IMG_0751.JPG (46.57 KiB) Viewed 3663 times
User avatar
warb
Mod
Posts: 7518
Joined: Mon May 16, 2005 5:15 pm
Location: Penrith, Nsw, Australia
Contact:

Post by warb »

click click boom..
User avatar
FrankenCab
DSKer
Posts: 3528
Joined: Wed Apr 18, 2007 8:55 pm

Post by FrankenCab »

just a few updates , rear bumper from kuch bit of work needed but on .
then took it down to the farm good trip except for a short in the choke wiring , needs a little more power to make it fun up hills .
bogged and blended doglegs and lower front doors , but yeah all good looking at sorting some rims and discs for the back and big cc motor.
and either steering rack conversion or raising steering box.
luv driving it.. amazing how much attention an old shit box can attract too.
Attachments
IMG_0883.JPG
IMG_0883.JPG (52.85 KiB) Viewed 3590 times
IMG_0885.JPG
IMG_0885.JPG (72.35 KiB) Viewed 3590 times
IMG_0888.JPG
IMG_0888.JPG (98.2 KiB) Viewed 3590 times
User avatar
warb
Mod
Posts: 7518
Joined: Mon May 16, 2005 5:15 pm
Location: Penrith, Nsw, Australia
Contact:

Post by warb »

nice mate, love it.. needs a visor and a rusty badge tho :twisted:
User avatar
FrankenCab
DSKer
Posts: 3528
Joined: Wed Apr 18, 2007 8:55 pm

Post by FrankenCab »

in time , always carry the appropriate tools with me.
They shall be mine ...I'll distract you with my hypno-dog.
Attachments
IMG_0897.JPG
IMG_0897.JPG (67.31 KiB) Viewed 3568 times
User avatar
daveo
DSKer
Posts: 1294
Joined: Sun Sep 04, 2005 9:47 am
Location: Turners Beach Tassie
Contact:

Post by daveo »

Mate you gotta be happy with that !
Look the goods on da road and even better on da farm.
Gotta love a sweet staffy too !
Real nice looking pannel....a credit to all your hard work.
LOVE pano's
Post Reply