Re33pa, new toys...

D-Train · Post by **D-Train** » Sun May 31, 2009 11:28 am

whereisfelicity wrote:diiiooooonnnn i want to see pics of the rest of the interior

as soon as i sort out photobucket, they will be on here..

patience my young padawan.

kyznet · Post by **kyznet** » Mon Jun 01, 2009 4:09 pm

dmb wrote:letters plus numbers = $90 per year

just letters = $450 per year

every year

forever

welcome to nsw

QLD is even worse - for just letters it's a once off of $2895.

hjsimpson01 · Post by **hjsimpson01** » Mon Jun 01, 2009 4:34 pm

Well I have to say in TAS they did get it partly right.. 3 letters 3 digits is $275 (I think), Euro "T" then 2 letters 3 numbers $575, then all out anything 2 to 6 alphanumeric is $1195 (once off on all).

There are other styles, like Football club styles, premium plates, etc which are all along the same lines...

When I say sort of got it right, the plate styles are lame compared to the NSW Euro plates that I have seen... I had to go to:
www.germanplates.com because I wanted a plate mounting mould for the front and back, nowhere local stocks that type of thing, that I could find... While I was there I got a set of plates too... It was $7.95USD for the bracket/surround/mould or $30USD for the same thing with a plate, so I figured what the heck... Got to choose whatever I wanted on the plate, registered that combo with TASPLATES as a Euro plate and now I have the best looking (combination not included in statement) plates on any of my cars.... IMHO...

Personal plates are only sensible/useful if they don't cost more than what they are on! For instance I would not get any for my Land Rover...

D-Train · Post by **D-Train** » Mon Jun 22, 2009 2:47 pm

finally got it to work..

ben these are for you.

the rear interior b4 the seats go in..

just got to get my seats from coffs now, unless someone is on the way down to newy?

Shaven · Post by **Shaven** » Mon Jun 22, 2009 5:02 pm

where's the pussy

winerot · Post by **winerot** » Mon Jun 22, 2009 6:08 pm

dion i might be doing a quick run to syd later this week with seats to go to melb for brad have room .
wally

kombi1976 · Post by **kombi1976** » Mon Jun 22, 2009 11:15 pm

What sort of seats are you putting back there, Dion?
BTW, any word on my speedo yet?

aircooled_nut · Post by **aircooled_nut** » Tue Jun 23, 2009 10:07 pm

kombi1976 wrote:What sort of seats are you putting back there, Dion?

How about this

Sorry Dion couldn't resist!

Nice bus, keep up the great work.

Tonz Magonz · Post by **Tonz Magonz** » Wed Jun 24, 2009 11:30 am

aircooled_nut wrote:
kombi1976 wrote:What sort of seats are you putting back there, Dion?
How about this

Sorry Dion couldn't resist!

Nice bus, keep up the great work.

Hey... Thats Bruceys naughty boy chair...Bloody uncomfortable..

FrankenCab · Post by **FrankenCab** » Wed Jun 24, 2009 12:00 pm

the Gimp should be at home in there

very cool though , hey whats the dimension of the window in the divider , am about to make one and just need location from centre of roof to top of hole and the overall size.

Dutchy · Post by **Dutchy** » Wed Jun 24, 2009 12:16 pm

kombi1976 wrote:What sort of seats are you putting back there, Dion?
BTW, any word on my speedo yet?

Panel van's for goods not kids.....it'd be a bit boring only being able to see out the back window.

winerot · Post by **winerot** » Wed Jun 24, 2009 1:55 pm

i thought you would put a biscuit rack in the back dion even better a his & hers biscuit rack

.

Shaven · Post by **Shaven** » Wed Jun 24, 2009 3:46 pm

i did notice he had a centre mount in the back on the roof...

rumour has it a similiar device was taken down the night before

FrankenCab · Post by **FrankenCab** » Wed Jun 24, 2009 4:02 pm

how much weight can that hold ?

Shaven · Post by **Shaven** » Wed Jun 24, 2009 4:08 pm

FrankenCab wrote:how much weight can that hold ?

it held surfie boy & myself so u'll be fine