'63 11 window
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
rabidkombi
- DSKer
- Posts: 643
- Joined: Sun Mar 27, 2011 8:48 am
- Location: Hills District,Sydney
Re: '63 11 window
Wow that is amazing work right there
-
MID WEST DUBBER
- DSKer
- Posts: 1336
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
First section of gutter removed and replaced. Also the rear corner gutter removed...
The top half of the rear corner removed, pillar and side join were sandblasted.
A small repair was needed at the side...
Rear corner installation...
The top half of the rear corner removed, pillar and side join were sandblasted.
A small repair was needed at the side...
Rear corner installation...
-
D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: '63 11 window
Oh yeah!!!!
-
Zimblewinder
- DSKer
- Posts: 1356
- Joined: Fri May 20, 2005 9:28 am
- Location: Geeeeeelong
Re: '63 11 window
that is great welding. How do you keep the warp to a minimum. Air line? Any dolly work?
March 58 Euro 23.
April 59 Mango
Wanted:
59 crank handle (tick!)
cargo door outer handle 59
two perfect rear floor mats (pretty pretty please!!!)
April 59 Mango
Wanted:
59 crank handle (tick!)
cargo door outer handle 59
two perfect rear floor mats (pretty pretty please!!!)
-
MID WEST DUBBER
- DSKer
- Posts: 1336
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
I took my time and did it over a couple of days and let it cool naturally, minimal warp and only a tiny bit of dolly workZimblewinder wrote: ↑Mon Mar 15, 2021 8:07 pm that is great welding. How do you keep the warp to a minimum. Air line? Any dolly work?
-
vanell
- DSKer
- Posts: 1641
- Joined: Sat Jul 15, 2006 3:58 pm
Re: '63 11 window
Good work Rusty, it’s coming up a treat 
-
splitthis
- DSKer
- Posts: 1616
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
Re: '63 11 window
Nice work rusty, quality repairs will last forever.
-
D-Train
- DSKer
- Posts: 3510
- Joined: Mon Nov 28, 2005 3:03 pm
- Location: coffs harbour
Re: '63 11 window
Fantastic!
-
MID WEST DUBBER
- DSKer
- Posts: 1336
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
Left side rear corner removed and replaced. Sandblasted and primed pillar and side panel...
Rear hatch gutter section removed after taking a lot of measurements. Also the rear corner required some modification to fit and line up nicely...
New rear gutter section welded on...
Rear corners prepared and ready for the corner gutters. Next will be the left hand side from the corner to above the cargo doors...
Rear hatch gutter section removed after taking a lot of measurements. Also the rear corner required some modification to fit and line up nicely...
New rear gutter section welded on...
Rear corners prepared and ready for the corner gutters. Next will be the left hand side from the corner to above the cargo doors...
-
braddick
- DSKer
- Posts: 974
- Joined: Fri May 17, 2013 1:07 pm
Re: '63 11 window
Great work buddy
Top shelf stuff
Top shelf stuff
-
splitthis
- DSKer
- Posts: 1616
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
-
Beatts
- DSKer
- Posts: 434
- Joined: Wed May 30, 2018 11:23 pm
- Location: Adelaide
Re: '63 11 window
Clearly it’s not your first rodeo because thats some gutsy work right there!
-
MID WEST DUBBER
- DSKer
- Posts: 1336
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
thanks guys, still ticking off the jobs...
Front roof bow has been removed to make it easier to sandblast the gutter at the sides. I have also blasted and primed the roof bow...
Left side gutter has been removed...
New gutter clamped on and getting lined up..
Welded in and tied in to the rear corner...
Front roof bow has been removed to make it easier to sandblast the gutter at the sides. I have also blasted and primed the roof bow...
Left side gutter has been removed...
New gutter clamped on and getting lined up..
Welded in and tied in to the rear corner...
-
spl65t
- DSKer
- Posts: 1748
- Joined: Wed May 27, 2009 8:18 pm
- Location: Hills Area - Sydney
Re: '63 11 window
Are you telling us, you do this just as a hobby on the side !!! 
You are smashing it, I'm sure as shit - if you were on the East Coast peeps would be booking there bus in for you to ply your trade.
Love seeing anything dragged from the Dead.
Far out, this one's another contender for the DSK Hall of Fame resurrection. Along with the Cubby Hut...wow !
Rego before Easter ?
Cheers Linz
You are smashing it, I'm sure as shit - if you were on the East Coast peeps would be booking there bus in for you to ply your trade.
Love seeing anything dragged from the Dead.
Far out, this one's another contender for the DSK Hall of Fame resurrection. Along with the Cubby Hut...wow !
Rego before Easter ?
Cheers Linz
- Attachments
-
- you-cannot-be-serious.jpg (28.72 KiB) Viewed 5429 times
Der Splitty.....slowest thing up the Blue Mtns, since Wentworth, Blaxland & Lawson 
-
MID WEST DUBBER
- DSKer
- Posts: 1336
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
spl65t wrote: ↑Thu Mar 25, 2021 3:26 pm Are you telling us, you do this just as a hobby on the side !!!
You are smashing it, I'm sure as shit - if you were on the East Coast peeps would be booking there bus in for you to ply your trade.
Love seeing anything dragged from the Dead.
Far out, this one's another contender for the DSK Hall of Fame resurrection. Along with the Cubby Hut...wow !
Rego before Easter ?
Cheers Linz
Thank for the comments Linz! No qualifications here mate, I just enjoy working with my hands and having a go.
This is my first bus build so learning as I go and loving every minute. I’ve had the bus since 2012 and would love to have a red hot crack at getting it close to having the body done by the time I turn 25