Kuch's 1956 11 Window Kombi Project [16-09-08]
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
- DSKer
- Posts: 27
- Joined: Tue Sep 19, 2006 1:56 pm
- Kuchster
- DSKer
- Posts: 495
- Joined: Sun Dec 02, 2007 10:12 pm
- Location: Sydney West
Semaphores are hard to find, but i might be able to organise some for you. Send me a pm when your ready for them.
The brown bus is a dual back light bus, no semaphores.
Kuch
The brown bus is a dual back light bus, no semaphores.
Kuch
Kuch's Laser Cut Products
http://www.kuch.com.au/laser
http://www.kuch.com.au/laser
- Kuchster
- DSKer
- Posts: 495
- Joined: Sun Dec 02, 2007 10:12 pm
- Location: Sydney West
Saturday with some nicer weather.
Welding a new lip on the inner panel due to the old panel beaters cutting it off...
New top section replaced. When we lined up the corner panel, was nearly 20mm out of line and they welded it on like that before! Unbelieveable
New bottom section
New side lip which mounts onto the back end
Making the bends to the curve by working with the metal and oxy
Nearly there
Welded in place on top section
And picked up a new ride! More parts and panels bus.
Enjoy
Kuch
Welding a new lip on the inner panel due to the old panel beaters cutting it off...
New top section replaced. When we lined up the corner panel, was nearly 20mm out of line and they welded it on like that before! Unbelieveable
New bottom section
New side lip which mounts onto the back end
Making the bends to the curve by working with the metal and oxy
Nearly there
Welded in place on top section
And picked up a new ride! More parts and panels bus.
Enjoy
Kuch
Kuch's Laser Cut Products
http://www.kuch.com.au/laser
http://www.kuch.com.au/laser
- Leroy
- DSKer
- Posts: 2544
- Joined: Thu Jul 05, 2007 11:58 pm
- Location: Brisbane (bayside)
-
- DSKer
- Posts: 1393
- Joined: Fri Sep 29, 2006 9:33 am
- Location: Sydney, Australia
- Kuchster
- DSKer
- Posts: 495
- Joined: Sun Dec 02, 2007 10:12 pm
- Location: Sydney West
You havent seen nothin yet
I took the photo from a good angle
Was a chicken shed once, wouldnt say theres much left of the floor and rear chassis.
Roof is bent and the floor isnt holding together, so you can notice a small gap on the top of the cargo doors, and rather large on the bottom where the bus has stretched.
Kuch
I took the photo from a good angle
Was a chicken shed once, wouldnt say theres much left of the floor and rear chassis.
Roof is bent and the floor isnt holding together, so you can notice a small gap on the top of the cargo doors, and rather large on the bottom where the bus has stretched.
Kuch
Last edited by Kuchster on Sat Mar 29, 2008 10:04 pm, edited 1 time in total.
Kuch's Laser Cut Products
http://www.kuch.com.au/laser
http://www.kuch.com.au/laser
-
- DSKer
- Posts: 1393
- Joined: Fri Sep 29, 2006 9:33 am
- Location: Sydney, Australia
- Kuchster
- DSKer
- Posts: 495
- Joined: Sun Dec 02, 2007 10:12 pm
- Location: Sydney West
Thats the same trailer that picked up the blue kombi from victoria.
Is it your lucky number eh?
Is it your lucky number eh?
Kuch's Laser Cut Products
http://www.kuch.com.au/laser
http://www.kuch.com.au/laser
-
- DSKer
- Posts: 1393
- Joined: Fri Sep 29, 2006 9:33 am
- Location: Sydney, Australia
- Kuchster
- DSKer
- Posts: 495
- Joined: Sun Dec 02, 2007 10:12 pm
- Location: Sydney West
-
- DSKer
- Posts: 1393
- Joined: Fri Sep 29, 2006 9:33 am
- Location: Sydney, Australia
- Kuchster
- DSKer
- Posts: 495
- Joined: Sun Dec 02, 2007 10:12 pm
- Location: Sydney West
I see, not a porsche man myself. Nice to look at though.
Kuch
Kuch
Kuch's Laser Cut Products
http://www.kuch.com.au/laser
http://www.kuch.com.au/laser
-
- DSKer
- Posts: 1393
- Joined: Fri Sep 29, 2006 9:33 am
- Location: Sydney, Australia
-
- DSKer
- Posts: 4516
- Joined: Mon May 16, 2005 12:56 am
- Contact:
- Kuchster
- DSKer
- Posts: 495
- Joined: Sun Dec 02, 2007 10:12 pm
- Location: Sydney West
Sunday with some unexpected suprises.
I love the smell of grinding off bog on a sunday morning to find some brass underneath!
Well, we can fix that
Looking better
Done
Hmm, bit out of alignment
Ahh, few tensioners can fix that
Note, all metal, no bog in this baby. Even that cheap spray can matches the original colour!
Dont they look cute together
More next weekend.
Kuch
I love the smell of grinding off bog on a sunday morning to find some brass underneath!
Well, we can fix that
Looking better
Done
Hmm, bit out of alignment
Ahh, few tensioners can fix that
Note, all metal, no bog in this baby. Even that cheap spray can matches the original colour!
Dont they look cute together
More next weekend.
Kuch
Kuch's Laser Cut Products
http://www.kuch.com.au/laser
http://www.kuch.com.au/laser