'56 SCab
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- SplitPersonality
- DSKer
- Posts: 657
- Joined: Sun Apr 15, 2007 11:04 am
- Location: Left at the round-a-bout and up the hill
'56 SCab
G'day here is progress on the SCab thus far..
Replaced;
Inner and outer sills, Front outriggers and parts of tophats front and RH rear, Treasure chest floor patches, Tank supports.
Repaired; Damage on long side and damage on roof.
As is always the case, the more that is removed, the more crusty suprises are found..although too bad.
Here is a few pics....
Replaced;
Inner and outer sills, Front outriggers and parts of tophats front and RH rear, Treasure chest floor patches, Tank supports.
Repaired; Damage on long side and damage on roof.
As is always the case, the more that is removed, the more crusty suprises are found..although too bad.
Here is a few pics....
- Attachments
-
- Tank support 1.JPG (60.66 KiB) Viewed 1091 times
-
- Now with identity2.JPG (60.3 KiB) Viewed 1091 times
-
- Bed floor 3.JPG (55.17 KiB) Viewed 3019 times
-
- RHS Straight 4.JPG (51.79 KiB) Viewed 1091 times
-
- Top vent out 5.JPG (61.32 KiB) Viewed 1091 times
-
- RHS Before 6.JPG (54.73 KiB) Viewed 1091 times
-
- Roof after 8.JPG (48.33 KiB) Viewed 1091 times
-
- Roof before 10.JPG (40.56 KiB) Viewed 1091 times
-
- LHS Sill 11.JPG (44.31 KiB) Viewed 3019 times
-
- Potting mix 12.JPG (66.5 KiB) Viewed 1091 times
- Shaven
- DSKer
- Posts: 7420
- Joined: Tue Sep 19, 2006 4:17 pm
- tinman
- DSKer
- Posts: 231
- Joined: Tue Aug 16, 2005 10:44 pm
- Location: Lalor Park, Sydney NSW
- SplitPersonality
- DSKer
- Posts: 657
- Joined: Sun Apr 15, 2007 11:04 am
- Location: Left at the round-a-bout and up the hill
Hey thanks fullas
Matty, all panels are made with zinc coated sheet, great for repelling the rust that bit better..
And yes I plan to retain the weathered, super ratty look for now, maybe just blending new rust repairs into the dove blue.(Or whats left of it! 0
Tinman, Plans for now are Sbug engine and gearbox, IRS, Very Narrow beam, Safaris, Whitewalls and almost scratching his belly on the road!
Matty, all panels are made with zinc coated sheet, great for repelling the rust that bit better..
And yes I plan to retain the weathered, super ratty look for now, maybe just blending new rust repairs into the dove blue.(Or whats left of it! 0
Tinman, Plans for now are Sbug engine and gearbox, IRS, Very Narrow beam, Safaris, Whitewalls and almost scratching his belly on the road!
- Shaven
- DSKer
- Posts: 7420
- Joined: Tue Sep 19, 2006 4:17 pm
- no show
- DSKer
- Posts: 1102
- Joined: Tue May 17, 2005 8:31 pm
- SplitPersonality
- DSKer
- Posts: 657
- Joined: Sun Apr 15, 2007 11:04 am
- Location: Left at the round-a-bout and up the hill
- tinman
- DSKer
- Posts: 231
- Joined: Tue Aug 16, 2005 10:44 pm
- Location: Lalor Park, Sydney NSW
- kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
- splitbus
- DSKer
- Posts: 3232
- Joined: Sun Dec 09, 2007 7:47 am
- Location: Brisbane Northside
- Leroy
- DSKer
- Posts: 2544
- Joined: Thu Jul 05, 2007 11:58 pm
- Location: Brisbane (bayside)
-
- DSKer
- Posts: 121
- Joined: Fri Oct 27, 2006 9:17 pm
- Location: alpine region
- splitbus07
- DSKer
- Posts: 615
- Joined: Thu Nov 08, 2007 11:43 am
- Location: North Balgowlah, Sydney