el concreto in rehab drying out
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- kombibob
- DSKer
- Posts: 1361
- Joined: Mon May 16, 2005 4:33 pm
- Location: noosa hinterland
el concreto in rehab drying out
some of you probably know the evil things i am doing to el concreto.
included will be rack and pinion steering and disk brakes.
cooling will be a treasure chest mounted radhousing with air comming from the high roof vents.
the only cutting will be a little timming off the rear valance and a hole in the treasure chest floor and air channel. the metal i cut out of the floor will be used to repair other holes in the treasure chest floor. ha ha
from the out side there should be no sign of the conversion, and will be very easy to take back to stock, what ever that is?
included will be rack and pinion steering and disk brakes.
cooling will be a treasure chest mounted radhousing with air comming from the high roof vents.
the only cutting will be a little timming off the rear valance and a hole in the treasure chest floor and air channel. the metal i cut out of the floor will be used to repair other holes in the treasure chest floor. ha ha
from the out side there should be no sign of the conversion, and will be very easy to take back to stock, what ever that is?
Last edited by kombibob on Mon Jun 28, 2010 7:20 pm, edited 3 times in total.
get down low and go go go
- froger
- DSKer
- Posts: 813
- Joined: Sat Jul 05, 2008 7:46 pm
- Location: Mid North Coast . N.S.W
- Shaven
- DSKer
- Posts: 7420
- Joined: Tue Sep 19, 2006 4:17 pm
- kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
- Joelwantsasplit
- DSKer
- Posts: 564
- Joined: Fri Mar 02, 2007 4:00 pm
- splitbus
- DSKer
- Posts: 3233
- Joined: Sun Dec 09, 2007 7:47 am
- Location: Brisbane Northside
-
- DSKer
- Posts: 1028
- Joined: Sat Nov 26, 2005 11:15 pm
- Location: brisbane
- MISS VDUB
- DSKer
- Posts: 1210
- Joined: Mon Oct 02, 2006 7:06 pm
- Location: Sunshine Coast
- Split Rat
- DSKer
- Posts: 229
- Joined: Fri May 12, 2006 1:57 pm
- Location: Melbourne Vic.
- kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
- froger
- DSKer
- Posts: 813
- Joined: Sat Jul 05, 2008 7:46 pm
- Location: Mid North Coast . N.S.W
- spl65t
- DSKer
- Posts: 1748
- Joined: Wed May 27, 2009 8:18 pm
- Location: Hills Area - Sydney
-
- DSKer
- Posts: 1028
- Joined: Sat Nov 26, 2005 11:15 pm
- Location: brisbane
- Joelwantsasplit
- DSKer
- Posts: 564
- Joined: Fri Mar 02, 2007 4:00 pm
- kombibob
- DSKer
- Posts: 1361
- Joined: Mon May 16, 2005 4:33 pm
- Location: noosa hinterland
took today off work to start cutting!!
cut the opening in the floor and in the air channel, will have to seal off the air channel after the cut so air is directed through the radiator only.
now i have to make up a frame to hold the rad and enclose it with a opening door to service the fan.
i also trimmed up the rear valance.
cut the opening in the floor and in the air channel, will have to seal off the air channel after the cut so air is directed through the radiator only.
now i have to make up a frame to hold the rad and enclose it with a opening door to service the fan.
i also trimmed up the rear valance.
get down low and go go go