55 Wolfsberg Built 11 winda

[Wassa]

Hi Grant, well done, certainly dont muck around... have you tried mr muscle? not quite so aggressive, might leave the original colour there.... p.s. i finally put some photos up of my 55 panel...

[spl65t]

Good stuff. With your temp prop - if your using it to lock the car into position, run it vertical. Just in case....snap.
Linz

[resol]

Hi Grant, well done, certainly dont muck around... have you tried mr muscle? not quite so aggressive, might leave the original colour there.... p.s. i finally put some photos up of my 55 panel...

Nice one Wassa, ill check it out!
Muck around.... havent really done much at allLL
hahahaha
Cheers

[resol]

Good stuff. With your temp prop - if your using it to lock the car into position, run it vertical. Just in case....snap.
Linz

Cheers Linz
It was just a Temp prop for the photo, it has bolt holes in the pivot points for safety but I need to align them a little better, the bus is slowly moving forward with each spin, I think my carport is slightly falling to the front (water drainage).
cheers

[resol]

Spent another half day removing more roof paint back to bare metal!


Back left top quarter undercoat paint looked funny (looked like it was bogged) so I took to it with the sander and all good just looks like its had a rough time!



Also started to clean up around the front beam area, all good there, just needs a light sand and repaint!
b4 & after

[resol]

Got him off the rotisserie as having the sills and floor out made him a little weak in the middle. So made up some legs and got him stable still with a bit of height so I can get into the top hats, outriggers and sills etc!

[resol]

Started to cut the crusty pillars out and weld in some new steal!


New bit in



B pillar out


New one in

[resol]

Got a new outrigger in as well!!


Check and double check for alignment !

[Wassa]

Hi Grant... no updates lately??? hows it going?? watching mate keep the photos coming for those new bits going in... gotta save another 55 ...ah?

[resol]

Hi Grant... no updates lately??? hows it going?? watching mate keep the photos coming for those new bits going in... gotta save another 55 ...ah?

Hey Wazza, no updates m8, just been working on the house etc..
Havent got the hang of the welder yet.. still practicing on a suby bonnet lol..
whats doing your end?