Ian’s Dual Cab

[vanell]

Also got a diesel heater for it , one vent for the front and one vent for the rear , I’ll drill a hole in the toolbox area for the hose

IMG_9227.jpeg (125.85 KiB) Viewed 2984 times

[splitthis]

I’m really wishing I had have gone the diesel heater route, toasty warm.

[vanell]

Matt you can do both, have the original heater all hooked up so you can show off your heater boxes and tube wrap, then hide the diesel heater under the front seat so it nice and toasty warm
Diesel heaters are OG, that’s Oh Gee why didn’t I get one of these sooner, best part is you can turn them on 10 minutes before you leave,

[1958kafer]

Ian how do they work? 12 volt? Switch on the dash? Can you run multiple outlets to heat different areas?

[vanell]

Yeah 12 volt, little key fob thing like a garage door opener to turn it off/on and up/down
2 outlets, so one front through the toolbox area and one for the back through the bulkhead
And this one I’m thinking about putting a small tank In toolbox area as well, just have to lift the seat to fill

[vanell]

Front on and the doors still line up so that’s a bonus

IMG_9235.jpeg (99.82 KiB) Viewed 2948 times

[Snebo67]

Got a feeling it's going to be on it's wheels very soon. It's taken a ton of work to get this thing all squared up mate but it's really coming together now.

[Griffin]

loving watching this build and a reminder to self I need to install heater...

[spl65t]

loving watching this build and a reminder to self I need to install heater...

Maybe able to run a few outlet ducts out of his bus at Valla and park up near him for winter heating
Couple of bucks per hour ???

[vanell]

Test fit for the rear tyres, and it’s tight.
I fitted the IRS arm and put the drum on

IMG_9264.jpeg (107.04 KiB) Viewed 2832 times

IMG_9263.jpeg (109.97 KiB) Viewed 2832 times

[spl65t]

If that's around the intended ride height - I'm liking it

Thats another 5 mins well spent imo.

[Kombiiknut]

You know we love em tight Ian..
Looks siiiiiic

[067DUB]

Fkn perfect

[splitthis]

Wheels look even better on the bus mate, good choice.

[vanell]

I spot welded a strip along the lip and tapped the lip up on the rear guards, now have 10mm clearance then sprayed some undercoat on them
Now I’m going to fit everything then pull it apart and throw some paint at it

IMG_9282.jpeg (114.44 KiB) Viewed 2769 times

IMG_9281.jpeg (116.27 KiB) Viewed 2769 times